Are there still parts for the TASCAM da-30?

Are there still parts for the TASCAM da-30?

Parts are still available because Tascam’s original DA-30 uses the same ALPS mechanism. Batteries and power supplies are no longer available for many portables, but don’t throw out the “bad” adapter. If the cable and connector are still intact, ECO-CHARGE @ 800-361-5666can use them to retrofit their external rechargeable battery systems.

When to make a reference tape for a DAT machine?

ALESIS suggests that users make their own “reference tapes” when the machine is new. Format a new tape, date and test it for errors. Later, when a problem arises, you’ll be able to troubleshoot the problem rather than burning precious brain cells.

What causes alignment issues on Panasonic transport tapes?

This link shows how to make the connections. Alignment issues usually show up when tapes are sent out of house. Contrary to hearsay, while SONY and PANASONIC make their own transport and calibration tapes, the end result — the alignment — is the same.

Why does my Tascam da-30 tape deck Jam?

A lot of DA-30 (mk1) suffer from sticky grease after a couple of years, which results in tape jam. To fix this, you have to clean up the tape mechanism from old grease and make it smooth with a suitable lube after that.

How much harmonic distortion does a Tascam da-30 have?

Total Harmonic Distortion: 0.05% Weight: 8.5kg A lot of DA-30 (mk1) suffer from sticky grease after a couple of years, which results in tape jam. To fix this, you have to clean up the tape mechanism from old grease and make it smooth with a suitable lube after that.

What causes loading problem on Tascam da-30mkii portable?

Loading problems have been common to TASCAM’S DA-30MKII and the DA-P1 portable. Both use the same ALPS mechanism. Deep inside the mechanism, a rubber belt the size of a dime links a motor with a worm gear. The gear is sometimes over-lubricated.

Why does the play button not move on a reel of tape?

It could be that the capstan and pinch roller need to be cleaned or the pinch roller replaced. This may need done if the surface has become hard or shiny with wear. If the reel does not move, the play button kicks out. There are two reasons for this. The friction between the pinch roller and capstan is not enough to move the tape.