Can a HDMI cable be used with a pioneer receiver?

At the very lest, when you connect your audio directly to the receiver, if it sounds correct, you’ll know that this part of the issue is with the TV, rather then the cable box or PC. You could still use the HDMI cables to the TV, as it would now just be a display, with the digital audio going straight to the receiver.

Is the vsx-523-k with HDMI no sound?

Pioneer receiver vsx-523-k with HDMI has vider but no sound. Pioneer receiver vsx-523-k with HDMI has vider but no sound. I removed HDMI from SAT/CABLE (DirectTV)…

Why does my pioneer TV not have sound?

If you had sat connected to receiver via hdmi, and got sound to the tv speakers, then the receiver was either turned off (passthrough mode) or the receiver had the hdmi audio out (amp assign) set to tv. I think you should go back to the very beginning, do a factory reset on the pioneer]

Why does my pioneer HDMI projector not work?

The projector works fine on its own, but shows ‘No signal’ when plugged up to the HDMi output from the Receiver and any input into – Apple TV, PS4 I’ve done hard reset, and it does / did occasionally work, change the source and then nothing again, no signal.

Is there a problem with the pioneer receiver?

It does sound like the Pioneer receiver has an HDMI switching problem. That’s not unusual. Assuming that it’s out of warranty the cost of repairing the HDMI board is prohibitive. You could get an HDMI input selector with audio extraction. Connect your sources to it with HDMI.

Pioneer receiver vsx-523-k with HDMI has vider but no sound. Pioneer receiver vsx-523-k with HDMI has vider but no sound. I removed HDMI from SAT/CABLE (DirectTV)…

Where does the HDMI go on a pioneer receiver?

The HDMI out goes to the projector and the digital audio out to the receiver. You won’t get lossless audio like Dolby TrueHD but will work fine with Dolby Digital and DTS. It does sound like the Pioneer receiver has an HDMI switching problem. That’s not unusual.

Why are there no HDMI inputs on pioneer VSX 520?

Mass-produced quickly and cheaply, they became part of the most budget receivers, as well as flagship models. As a consequence of such mass production and heat inside the units over time, the circuit boards supporting the hardware didn’t hold up and failed before the main units.

Why is my pioneer 5.1 AV receiver not working?

You can regain your 5.1 if your TV has a digital audio output and can be set to output in Bitstream. There should be no loss in quality unless you play BD discs or files with lossloss audio codecs like Dolby TrueHD. Thanks to both of you for your help.

Why does my pioneer HDMI not turn on?

Related issues with HDMI have to do with the quality of the HDMI physical connections. These are mostly at the back of the top HDMI board on most Pioneer units. If you remove the top cover (side and back screws hold it on, then lift the back up, and pull up and out toward the back), you will see the top board.

Where is the enter button on a pioneer receiver?

On Pioneer receivers, you unplug the unit, fully powering it down. Plug it back in, but do not power it up yet. On the front panel, find the button marked “Enter”. Depending on unit, this may be a single isolated button or a bar type button along a line of such bars.

Why does my pioneer AV receiver keep dropping?

Everything is connected via HDMI. Set this up about 4 years ago and it ran without a hitch–until last year. Then it began to emit a loud pop and the picture and sound would be lost, come back in 20 seconds, and pop out again. To keep WAF high I just plugged the PC and the cable box directly into the Panasonic’s 2 HDMI inputs.

Why is my pioneer 5.1 HDMI not working?

It’s possible for the receiver to have developed an HDMI switching problem. You can regain your 5.1 if your TV has a digital audio output and can be set to output in Bitstream. There should be no loss in quality unless you play BD discs or files with lossloss audio codecs like Dolby TrueHD. Thanks to both of you for your help.

What does the new pioneer elite receiver look like?

Physically speaking, 2021’s crop of Pioneer Elite receivers looks nearly identical to its last model run of LX-xx4 gear. Each model has a gorgeous brushed aluminum front panel with robust volume and selector knobs, a bottom flip-down cover that conceals inputs and buttons, and Pioneer’s classic orange display.