Can Xfinity remote control audio receiver?

You can program your Xfinity Voice Remote to work with your TV and audio/video (AV) receiver, like a sound bar and other pieces of audio equipment. If you have Xfinity X1 or Xfinity Flex, follow these steps to pair the remote with your TV Box or streaming device – you can even control it when it’s out of sight.

How do I program my Xfinity remote to my surround sound?

Programming an Xfinity X1 Remote to Your Soundbar

Make the Soundbar the receiver output.
Press the Setup button on your Xfinity X1 remote.
Wait until the LED light at the top turns green.
Enter the Soundbar’s manufacturer code.
Wait for the LED light to flash twice (in green)
Test the remote.

Does Xfinity have RF remotes?

If you have an Xfinity X1 main TV Box or Player, you can use the XR2/XR5 remote control with Aim Anywhere control (RF capability) even if they are stored in a closet or another room, up to 50 feet away. Note: With some TV Boxes, connecting the IR Extender disables the RF input on the front of the TV Box.

How do I pair my XR15 remote to my receiver?

Press and hold Xfinity and Info (i) buttons together for 5 seconds until the LED turns GREEN. Follow the TV on-screen instructions to enter the 3-digit code that appears. The remote is now paired and the cable box should now respond to any keypress, even when hidden in a cabinet.

Is the xfinity remote IR or RF?

The Xfinity remote uses either RF (radio frequency) or IR (infrared) signals to control the Xfinity box. Control Center can only send IR to Xfinity STB (see IR Learning section below). IR signals require a direct “line of sight” to work properly.

How do I change my xfinity remote from IR to RF?

But Xfinity is usually installed in RF (radio frequency). Flipper is an IR (infra red) remote….Set STB to “Activate IR” (Infrared)

Use Xfinity remote to change settings in box: Menu>Settings>Remote Control>Activate IR.
Some remotes have a setup button: press hold Setup button until light solid, then enter 987.

How do I activate my xr11 remote?

Be sure to point the remote at your equipment during setup.

Press and hold SETUP until the LED turns GREEN.
Press the Xfinity button.
Follow the TV on-screen instructions to enter the 3-digit code that appears.
The remote is now paired and voice commands should work when you hold down the VOICE CONTROL key.

How do I reset my Xfinity Voice remote XR15?

Factory Reset the Xfinity Voice Remote without a Setup Button (XR15)

Press and hold the A (triangle) and D (diamond) buttons at the same time for three seconds until the status light changes from red to green.
Press 9-8-1.
The LED will blink blue three times to indicate that the remote was reset.

How does the Xfinity xr11 voice remote work?

Check out the diagram of the XR11 remote’s buttons and functionality . When the Voice Remote is programmed with a valid TV code, the Power button turns the TV on or off. For programming information, visit Turns on/off both the TV and TV Box. For programming information, visit

How to pair Xfinity xr16 flex remote to TV?

Pair the XR16 Flex Remote to a TV 1 Go to the Remote Settings menu. Press and hold the Voice (Microphone) button and say “Remote settings.” 2 Choose “Voice remote pairing.” 3 Follow the instructions on the TV to select your TV and audio devices.

How can I use my XR15 remote to control my TV?

To use your XR15 remote to control your TV (including power, volume and input): While the TV is on, press and hold the xfinity and Mute buttons on the remote together for five seconds until the remote light at the top changes from red to green. Enter the first five-digit code listed for the TV manufacturer.

What is the power button on the Xfinity remote?

XR15 Button Functions Power: Consolidated All Power and TV Power functionality When the Voice Remote is programmed with a valid TV code, the Power button turns the TV on or off.

What does the Xfinity xr11 Voice Remote do?

The Xfinity XR11 Voice Remote offers an enhanced TV viewing experience, offering the ability to search for programs or tune to networks using voice commands. Discover content by channel, program name, or key words by simply pushing a button and speaking.

How do I program my Xfinity X1 remote?

If you have Xfinity X1 service and the X1 Voice Remote, simply press the microphone button, and say, “Program remote.”. If you don’t have a Voice Remote, follow these steps: Press the A button on your remote control. Select Remote Setup. Follow the on-screen instructions.

Can Xfinity remote control audio receiver?