How can I change my DSC 1616 installer code?

How can I change my DSC 1616 installer code?

How do I change the DSC 1616, 1832, and 1864 installer code?

1. Enter programming with *8-installer code (default is 5555).
2. Go to section 006 to change the installer code.
3. Enter a unique 4 digit code. The system should beep 3 times and exit back out.
4. Press # to exit programming mode.

How do you enter a code on a DSc?

Using the number keys, enter the four-digit Access Code (ie: 1, 2, 3, 4). When programming is complete, you can enter another 2-digit code to program another code, or Press # to exit. You’re done! The “Armed” light will illuminate on the keypad, and the “program” or “System Indicator” light will begin to flash.

What do you need to know about lcd5500 security station?

The LCD5500 Security Station will guide you through each operation with English language prompts. Read this manual carefully and have your installer instruct you on system operation and on which features have been implemented on your system. All users of this system should be equally instructed in its use.

How do you delete a user code on a DSc?

You’re done! The “Armed” light will illuminate on the keypad, and the “program” or “System Indicator” light will begin to flash. Select the 2-digit users code to program (the system has space for 32 users, so for user # 2, enter 0, 2). With the user selected press *. This will delete the code.

How does the ADT lcd5500 security system work?

The security system has several zones or areas of protection and each of these zones will have one or more detection sensors connected to it (motion detectors, glassbreak detectors, door contacts or shock sensors). When a sensor is in alarm, the zone in alarm will be displayed on the LCD5500 security station, Trouble and Armed LED Displays

The LCD5500 Security Station will guide you through each operation with English language prompts. Read this manual carefully and have your installer instruct you on system operation and on which features have been implemented on your system. All users of this system should be equally instructed in its use.

How to find the installer code for DSC security system?

After I enter the *8 [installer code], the word “program” flashes on the screen and the armed light is lit. It then seems to want 3 digits but no matter what 3 numbers I press next, nothing happens except the long “bad code” beep. I have read thru pages 8-11 but they don’t seem to be a help.

The security system has several zones or areas of protection and each of these zones will have one or more detection sensors connected to it (motion detectors, glassbreak detectors, door contacts or shock sensors). When a sensor is in alarm, the zone in alarm will be displayed on the LCD5500 security station, Trouble and Armed LED Displays

What do you need to know about the lcd5500 keypad?

This system is capable of transmitting alarms, troubles, and emergency information over telephone lines to a monitoring station. If you inadvertently initiate an alarm, immediately call the monitoring station to prevent an unnecessary response. Note: The monitoring function must be enabled by the installer before it becomes functional.