How can I control my DVR from my computer?

How can I control my DVR from my computer?

iDVR-PRO Surveillance DVR Web Browser Viewing

1. Connect your DVR to your router with a CAT-5 network cable.
2. Connect a monitor to your DVR if you have not already done so and power your DVR up.
3. Access the DVRs menu system using a mouse or the wireless remote control.
4. On the DVR System Menu click the Network Sub-Menu.

How do I find the IP address of my DVR on my computer?

If you are unsure of what your DVR LAN IP address is, you can find this by accessing the Network Setup menu from the DVR. Press the ‘Setup’ button. Enter the system password and press ‘Enter’. Select ‘System Setup’ and press ‘Enter’.

Can I connect my DVR to my PC?

Connecting a Digital Video Recorder to a computer requires a cable equipped with HDMI (High Definition Media Interface) cables on both ends, or an HDMI connector on one end and RCA-type audio/video jacks or a USB connector on the other end, depending on the available connection pots on the DVR.

How can I remotely access my DVR without static IP?

Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port – By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.

Can I connect a DVR to my computer?

How to connect a DVR to the Internet?

A Static IP is required if you will be using the Direct Connection Method. Press the Manual Configuration Button for such a setting. Once the status is online, the device is ready. We need to download the compatible APP for the device. 1. Press on the add recorder button. 2.

How do I set up PC NVR on my computer?

Click, “Disk Management” on the left hand side. In this section, you can allocate a specific portion of your computer’s hard drive to be used for recording video directly from your device. 8. Input the amount of space that you wish to allocate in gigabytes, and click “Allocate” After a brief moment PC-NVR will restart.

Is it possible to view your DVR remotely?

However, it’s still possible to view your system remotely with a slower connection such as DSL. Usually the internet service provider will provide you with the option to rent a modem from them unless you have your own available for setup. Router. A Router is a device which forwards the data between your network connections.

Do you need a wireless router for a DVR?

You will not need a wireless router to access your DVR remotely, so just about any router will do. Some of the larger router brands are Linksys (Cisco), D-Link, Netgear, Belkin, and even Apple. Ethernet Cables. These are usually sold as CAT5 (Category 5) cables which are used to connect you to the internet.

How can I use my computer as a DVR?

First, attach your cable connection or satellite cable to the video capture card’s input. Next, connect the DVR computer’s video card to your TV. For HD viewing, an HDMI connection is a must. Connect the audio output of your computer to the inputs on your TV or home theater system.

Why is my DVR not connecting to my computer?

If howerver you’re seeing “Request timed out” and “Packets: Sent X, Received = X, Lost = X” like below, then you have not established a LAN connection between the DVR and the computer. You will need to go back and recheck all DVR network settings. This could also be due to bad ethernet cables or bad DVR Network Interface Controller (NIC).

How to view live after configuration of DVR online?

Now your DVR device is configure successfully for online view. Before see DVR online make sure that your DVR device is show online or not. How to view live after configuration of DVR online. 5. Go to home page and select live view. When live view window is open double click on your DVR name for example my dvr.

Do you need a router for a DVR?

Make sure the PC and the DVR are using the same router. 2. If you dohave a PC inhouse, you will have two scenarios. One your running a modem/router combo or two you have a separate modem and router. A. If you have a modem/router combo (One box), you will have to purchase another router, so you can setup the router to do port forwarding.