How do I access my DVR on my network?

How do I access my DVR on my network?

Connect Your DVR to Your LAN | Basic Network Connection

1. Go to the COMMAND PROMPT.
2. Figure 3 shows a computer screen with the command prompt, and the PROGRAM FILES folder is open.
3. Write down the IP numbers shown under IP ADDRESS (192.168.
4. Now get the IP Address of the security DVR.

How can I access my DVR from my computer?

Web Browser Remote Access Setup Instruction

1. Connect your DVR to your router with a CAT-5 network cable.
2. Connect a monitor to your DVR if you have not already done so and power your DVR up.
3. Access the DVRs menu system using a mouse or the wireless remote control.
4. On the DVR System Menu click the Network Sub-Menu.

What to do if your DVR password fails?

THE WEB APPLICATION BROWSER COMES ON,I INSTALLED THE DvrOcx AND I TYPED IN THE SAME PASSWORD I PLACED WHEN I WAS CONNECTED LOCALLY) AND CHANGE THE OPTION NETWORK TO INTERNET BUT THE LOGIN FAILS. (THERE ARE ONLY 2 OPTIONS ON THE IE.

Why is my web login on my DVR not working?

Also, you sometimes have to use a different login and password for web use on some DVR’s. Try making another username and password on your local DVR and try logging in with that. If that doesnt work, try doing a factory default reset and starting over. On the password, I could only choose a 6-digit number, can’t use letters.

What is the user name for a DVR?

I tried user name ADMIN/admin, password:111111 as the user name and password when I first login to set up the DVR. Could someone please help me. I was stuck. Please.

What to do when your web login fails?

Make sure your passwords are case-correct. Also, you sometimes have to use a different login and password for web use on some DVR’s. Try making another username and password on your local DVR and try logging in with that. If that doesnt work, try doing a factory default reset and starting over.

Why does my DVR say message login failed?

I installed the active x control and get to the login page. I have checked that the control port is set to 5050 and the username is admin and I changed the password is 000000. I get a small pop up with the title “Prompt” and the message login failed everytime. Any Ideas?

What to do if you forget your DVR password?

Also, in the DVR manual it says that “if forget your password, please make the jump J16 on the main board short for about 5 seconds when machine works, user can access system menu to change your password again”. The manual isn’t written in very good English, but i tried this and it didn’t seem to do anything.

Make sure your passwords are case-correct. Also, you sometimes have to use a different login and password for web use on some DVR’s. Try making another username and password on your local DVR and try logging in with that. If that doesnt work, try doing a factory default reset and starting over.

I tried user name ADMIN/admin, password:111111 as the user name and password when I first login to set up the DVR. Could someone please help me. I was stuck. Please.