How do I connect my Bose Acoustimass 6?
William Smith
Published Mar 17, 2026
How do I connect my Bose Acoustimass 6?
Use the 20 foot (6 m) front speakers cable with three pairs of wires to connect the Acoustimass module to the center, left front, and right front cube speakers. Use the 50 foot (15 m) surround speakers cable with two pairs of wires to connect the Acoustimass module to the left and right surround cube speakers.
What does the Bose Acoustimass module do?
The powered Acoustimass module adds a big assist to the small cube speakers by providing deep, low notes. Whether it’s a haunting score or an oncoming storm, you’ll feel the realistic effects at any volume level, without audible distortion.
How do you remove a Bose Acoustimass speaker system?
• Remove the brown inner carton containing the five cube speaker arrays and the Acous- timass module terminal cover. • Gently roll the carton over onto its side and then onto its opening. • Carefully lift the carton from around the Acoustimass module and packing cushions. • Do not detach the removable cables connected to the Acoustimass module.
How big should the Acoustimass be in a room?
The Acoustimass module is not magnetically shielded and should be at least 2 feet (.6 m) from your screen, but at the same end of the room as the front and center speakers. Bose®
Can a Bose cube be connected to a Yamaha AMP?
For example, my new Yamaha RX-V595 can do 4 Ohm front speakers, but surround is only 6 Ohm. As you can see, my Bose Cubes have a 6.6 Ohm rating and my amp can support as low as 6 Ohm (surround speakers), hence I was confident my amp would not blow up if I connected them. Finding the right speakers & sub:
How big of an amp does a Bose cube need?
As you can see, my Bose Cubes have a 6.6 Ohm rating and my amp can support as low as 6 Ohm (surround speakers), hence I was confident my amp would not blow up if I connected them. Finding the right speakers & sub: Now going back to the frequency responses I mentioned earlier – this is the sound that your speakers can reproduce.
• Remove the brown inner carton containing the five cube speaker arrays and the Acous- timass module terminal cover. • Gently roll the carton over onto its side and then onto its opening. • Carefully lift the carton from around the Acoustimass module and packing cushions. • Do not detach the removable cables connected to the Acoustimass module.
The Acoustimass module is not magnetically shielded and should be at least 2 feet (.6 m) from your screen, but at the same end of the room as the front and center speakers. Bose®
As you can see, my Bose Cubes have a 6.6 Ohm rating and my amp can support as low as 6 Ohm (surround speakers), hence I was confident my amp would not blow up if I connected them. Finding the right speakers & sub: Now going back to the frequency responses I mentioned earlier – this is the sound that your speakers can reproduce.
