How do I connect my DVD player to my home theater speakers?

How do I connect my DVD player to my home theater speakers?

Connect the AUDIO OUT ports on your DVD player to the AUDIO IN ports on your TV with standard audio cables (red and white jacks). Connect the AUDIO OUT ports on your TV to your speakers using a standard audio cable, or a Digital Audio (Optical) cable.

How do you hook up AV cables to surround sound?

Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.

Can a DVD player be used as an amplifier?

Can DVD player be used as amplifier? Yes, generally Samsung DVD player requires TV to play Mp3 sound output. Some DVD player does not have sound output port and built in amplifier, in such cases you need speakers with Built in amplifier (amplifier according to your requirement).

How do you set up a home theater system?

To complete your home theater setup, you need to place and connect the speakers and subwoofer.

1. First, position your speakers and subwoofer, but be careful not to place them flush against any walls.
2. Connect your speakers to the AV receiver.
3. Connect the subwoofer line output of the AV receiver to your subwoofer.

How do you hook up a home theater system?

Hooking up a Home Theater system is a lot easier than it sounds. The fundamental rule when connecting the components together is that all the cables are connected, OUT to IN. The sound or the video signal will transfer OUT of a device, a DVD player, CD player, VCR etc., and IN to another, surround sound receiver or a video display.

How to hide wires for a home theater?

So, how do you hide wires for a home theater? The easiest and cheapest option is something that electricians call “trunking.” This term covers a few different things, but it’s basically a strip of plastic that contains all the wires, and is then glued or nailed to a wall.

What kind of cable do you need for a home theater?

Diagram 1 illustrates a simple Home Theatre configuration consisting of a TV, VCR, Cable Box, DVD Player and a Receiver / Amp. With this setup the VCR would need to be powered on to watch cable TV. The connections between the VCR, DVD Player, TV and the Receiver / Amp are all using Red, White and Yellow RCA cables.

What should I know about wiring my Home Theater?

The first piece of advice I can give when it comes to wiring your home theater is to know the scale of your project. If you have a big development planned that involves ceiling speakers and other flashy gadgets that require structural alterations, then it might be best to hire a professional.

What kind of wire do I need to hook up my home theater?

Connecting the speakers in a Home Theatre system is very easy, much easier than hooking up the components. Speaker wire will consist of one cable with two separate wires: positive and negative. The wires can be striped apart and are labeled either positive or negative.

What kind of cable do I need to hook up my DVD player?

Component Cables: Sporting better quality than A/V cables but less than HDMI, component cables are a set of five colored prongs attaching to five matching inputs on both the TV and the DVD player. Find the appropriate cable for your connection. Once you know what connection you will use, locate the cable and make sure it is not torn or frayed.

What do I need to hook up my cable box to my TV?

The cable box, TV, and stereo should be set relatively close to each other – some home cinema configuration. Turn everything off. Component video cables must go into the cable box – the video output. The other end must go into the video input on the TV. RCA cables should go into the cable box – look for the audio output ports.

How do you hook up a DVD player to a projector?

Some projectors use a “DVI Input” instead of the three connections listed above. If so, follow the same procedure as “Connecting with an HDMI Cable,” substituting a DVi cable for an HDMI. Plug the first end of the cable into the HDMI socket on the DVD player. Look for the “HDMI” or “HDMI Out” label and fit the cable securely into the socket.