How do I connect my soundcast Bluetooth?

Enable Bluetooth on your mobile device. Press the VG1 [A] Play/Pause/Phone button and hold until you hear a beep. In the Bluetooth settings menu on your mobile device, select “VG1 by Soundcast”. (The connection can take up to ten seconds.)

Why won my Avantree headphones won’t connect?

Press and hold the volume + and – buttons simultaneously for about 5 to 7 seconds until the LED quickly flashes PINK twice, indicating that the Avantree Audition headphones have reset. The headphones should then go into pairing mode and the LED will alternate between flashing RED & BLUE.

How do I pair my Avantree Bluetooth transmitter?

Get the Transmitter into Bluetooth Pairing Mode. Press & Hold button ”2”/ “B” until you see the Bluetooth indicator flashing RED & BLUE. 3.3. Put them close to each other and WAIT for them to pair & connect.

How do you put Avantree headphones in pairing mode?

You’ll see the Bluetooth icon next to “A” flashing RED & BLUE. Non-First-Time Use: If this is NOT the first time you’ve used it, simply enter it into pairing mode manually by Pressing & Holding the “A” button for 2 seconds. You’ll see the Bluetooth icon next to “A” flashing RED & BLUE.

How do you put Avantree in pairing mode?

How do I reset my wireless transmitter?

Resetting Transmitter/Receiver Devices

Make sure device is off.
Move the TX / RX switch to the opposite position.
Turn device on.
When device starts flashing red and blue, turn it off.
Move the switch back to the original TX or RX position.

How do I connect to Avantree?

Enter the NB16 Headphones into BLUETOOTH PAIRING MODE. Please make sure that the headphone has been turned OFF. While it’s OFF, Press & Hold the Multi-Function Button (the middle button, between + and -) until the LED flashes RED & BLUE alternately. You should also hear a “Pairing” voice prompt from the headphones.

How do I pair my Avantree ck11?

Press and hold the MFB for 3 seconds until LED indicators flashes BLUE and RED alternately with voice prompts “paring” to enter pairing mode. Note: Normally on first use when you set the toggle switch to ON, it will automatically enter pairing mode.

What kind of Bluetooth does the Soundcast vgtx use?

Bluetooth 4.2 Transmitter w/ aptX: The Soundcast VGtx is a long-range wireless stereo transmitter featuring Bluetooth 4.2 and the aptX Low Latency codec.

How do I connect my Vg1 to Soundcast?

Press the Play/Pause/Phone button and hold until you hear a beep. (The LED will quickly blink red/blue.) In Bluetooth settings menu on your mobile device, select “VG1 by Soundcast”. The connection can take up to ten seconds. Once paired, the LED will blink blue slowly.

Which is better Soundcast avantree or Soundcast vgtx?

The Soundcast VGtx (Bluetooth 4.2) reviewed here costs twice as much as the Avantree, but it promises up to 50 meters of range. My tests revealed that to be a bit of an overpromise, but the VGtx did outperform the competition.

What makes the vgtx wireless headphone so good?

What sets the VGtx apart is the improved Bluetooth chipset and larger antenna. You get a much faster, stronger signal with up to 150 feet of wireless range to move around in. This transmitter also includes aptX™ Low Latency, a wireless technology that keeps the audio and video in better sync.

What does the Soundcast vgtx Bluetooth transmitter do?

Marking the first accessory Soundcast has released since the Bluecast, which enabled Bluetooth capability to their legacy products the Outcast and Outcast Junior, the VGtx is also in the Bluetooth space. The long-range transmitter enables speakers to extend beyond the standard 30 meters and increases to 50 meter transmission.

What kind of Bluetooth does Soundcast VG5 use?

Along with the VG5 was a sample of Soundcast’s VGtx, “a long-range wireless stereo transmitter featuring Bluetooth 4.2 and the aptX Low Latency codec.” I’ve never had much love for Bluetooth, especially when used for wireless audio.

How do I connect my soundcast Bluetooth?