How do I connect my WYZE sense?
Andrew Ramirez
Published Feb 12, 2026
How do I connect my WYZE sense?
Adding a Sensor
- Open the Wyze app.
- Check your camera’s firmware to make sure it’s up to date.
- From the Home Tab tap the + plus sign on the top left.
- Select Add Device.
- Tap Sensors > Wyze Contact Sensor or Wyze Motion Sensor.
- On the next screen, select the camera you want to connect your sensor to.
How do I connect my WYZE sense hub to WiFi?
Connect Wyze Sense Hub to your router via ethernet….Troubleshooting
- In the Wyze app, tap the + plus sign > Add Device.
- Tap Sensors > Wyze Sense Hub.
- Single-press the Reset button on the back of the hub.
- Follow the in-app instructions to set up the hub.
Why is my WYZE sensor not working?
Remove the Bridge from the camera and Power Cycle the camera by unplugging the USB power cord, wait 5 seconds, and then plug the Bridge back in. If the Sensor is still not connected, try the setup process for the Sensor again. Ensure that the light on the Sensor is flashing at least 3 times during the setup process.
What happened to WYZE sense?
Wyze Sense is currently not available. Stay tuned for the next generation of Wyze Sense. Wyze Contact Sensors notify you any time something is opened, closed, or left open.
How long do WYZE sensors last?
12 months
Specs
| Color | White |
|---|---|
| Sensor Bridge Range | Recommend one Sensor Bridge per house |
| Sensor Bridge Capacity | Up to 100 sensors per Bridge |
| Power Source | Sensor Bridge: Wyze Cam or Pan Contact Sensor: CR1632 Motion Sensor: CR2450 |
| Battery Life | 12 months (replaceable battery included) |
Where is the reset button on the WYZE keypad?
3. Set up your keypad and sensors
- Tap Wyze Sense Keypad in the Wyze app. Turn the keypad around so the back is facing you.
- Tap Next in the Wyze app. On the back of your Wyze Keypad, press and hold the reset button until the Home button starts flashing white.
- Name your Wyze Keypad in the Wyze app.
- Tap Finish.
What is error code 90 on WYZE camera?
The Wyze error code 90 shows up quite often when viewing the Wyze camera and it’s related to the camera communication protocol. In other words, it means your Wyze cam can’t be reached by the streaming servers that are trying to access it.
Does WYZE have a siren?
Wyze Sense Hub connects all sensors to the Wyze app and has a built-in siren to ward off would-be intruders.
How do I get my WYZE contact sensor back online?
Do this by taping the On/Off button to the right of the camera’s listing on the Home tab. If the sensor still shows as offline, remove the Bridge from the camera and Power Cycle the camera by unplugging the USB power cord, waiting 5 seconds, and then plugging the Bridge back in.
How do I get my WYZE thermostat back online?
How Do I Get My Wyze Thermostat Back Online?
- Close out of the Wyze app on your phone or smart device.
- Reboot your home Wi-Fi router by holding down the reset button or unplugging it.
- After a few minutes, plug the router back in and allow it to restart fully.
- Open the Wyze app back up and try to adjust the thermostat.
Why did Wyze remove person detection?
“In a nutshell: Person Detection will be temporarily removed from Wyze Cam beginning with a new firmware release planned for mid-January 2020, due to the unexpected termination of our agreement with our AI provider. 26, 2019 would have to sign up for Cam Plus proper and pay a monthly fee.
How long do Wyze sensors last?
Which is the best Wyze sense starter kit?
This is decent kit. The motion sensor is chunky enough to sit on a desktop, but most will take advantage of the shaped, self-adhesive foam backing. The entry sensors have that same backing, ensuring easy installation.
How to add a sensor to a Wyze Cam?
Insert the included bridge into the back of a Wyze Cam, add a sensor in your Wyze app, activate the sensor, and it’s ready to go. One Bridge can support up to 100 Wyze sensors and has a signal range that will work throughout most US homes. 4.3 out of 5 stars. Read reviews for Wyze Sense – Starter Kit This action will navigate to reviews. .
Where does the Wyze sense sensor bridge plug in?
Rather than opt for another chunky network bridge taking up an Ethernet port on your router, the diminutive Wyze Sensor Bridge plugs into the Wyze Cam’s USB port. What Wyze Cam did for IP camera pricing, Wyze Sense does for sensors.
How can I connect my Wyze sense to my WiFi?
Wyze Sense piggybacks off the wifi connection from Wyze Cam, so setup is extra simple. Insert the included bridge into the back of a Wyze Cam, add a sensor in your Wyze app, activate the sensor, and it’s ready to go. One Bridge can support up to 100 Wyze sensors and has a signal range that will work throughout most US homes.
Which is the best Wyze sensor starter kit?
The Wyze Sensor Starter Kit is an ultra-affordable home security starter kit that comes with two contact sensors, a motion sensor, and a bridge. PCMag editors select and review products independently. If you buy through affiliate links, we may earn commissions, which help support our testing.
How big are the sensors on the Wyze sense?
The Sense Starter Kit comes with two small contact sensors, a motion sensor, and a bridge. The contact sensors measure 1.1 by 1.2 by 0.9 inches (HWD) when the sensor and magnet are lined up.
Wyze Sense piggybacks off the wifi connection from Wyze Cam, so setup is extra simple. Insert the included bridge into the back of a Wyze Cam, add a sensor in your Wyze app, activate the sensor, and it’s ready to go. One Bridge can support up to 100 Wyze sensors and has a signal range that will work throughout most US homes.
What do I need to update my Wyze sense?
Missing are motion-sensitivity settings for the motion sensor. To update the sensor’s firmware, reset your password and email address, enable Two-Factor Authentication, and access help files, tap the Account button on the bottom of the screen. The Wyze Sense Kit is a cinch install.
