How do I disable phone line on DSC 1832?

I’m not using a telephone line, how do I turn off telephone line monitoring on the DSC 1616, 1832, and 1864?

Enter programming with *8 – installer code.
Go to section 015.
Turn off toggle option 7 by pressing 7.
Press # twice to exit programming.
Verify that the trouble condition for the phone line should is gone.

How does the trouble code work on a DSc alarm?

Trouble codes are displayed on DSC keypads using either LED’s (on basic LED keypads) or as text (on LCD keypads with alphanumeric displays). Over the years, DSC has made many different alarm panels, and they don’t all share the same trouble code scheme.

How to turn off telephone line monitoring on DSC 1616, 1832 and 1864?

I’m not using a telephone line, how do I turn off telephone line monitoring on the DSC 1616, 1832, and 1864? Enter programming with *8 – installer code. Go to section 015. Turn off toggle option 7 by pressing 7. Press # twice to exit programming. Verify that the trouble condition for the phone line should is gone.

How can I Stop my DSC home alarm from beeping?

You can easily toggle this on or off by pressing and holding the “Chime” button on any keypad that has function keys. For keypads without a chime button, just press “*4”. On this page, I’ll show you how to silence trouble beeping, and how to use a few easy keypad commands to find the source of the trouble.

Why do I need to disconnect my phone line from my security system?

Additionally, if you have a cell backup unit installed, you no longer need a phone line connected to your system. You may want to disconnect it because you have discovered it is possible for someone to call your security system and hack into it, or if you have discontinued security monitoring.

What to do if your DSC alarm is not working?

Investigate if the phone lines are working. If your alarm is connected to the phone lines, temporary phone outages can cause the alarm to ring. Call your phone provider from your mobile phone to find out if there have been any phone line problems in your area.

What’s the master code for the DSC pc560?

Master Code A default Master Code “1234” is factory programmed into the PC560. The Master Code is used to arm and disarm the system, to silence the bell or siren after an alarm, and to program additional Access Codes. The ∗… Page 9: Disarming

What does STR stand for on DSC pc560?

STR Terminal Connection The STR (strobe output) terminal is a normally open output that will switch to ground when activated. This output will be activated when a zone alarm or tamper alarm is generated while the system is armed. The output will remain activated until the system is disarmed.

How do I disable phone line on DSC 1832?