How do I find my camera username and password?
Matthew Barrera
Published Feb 17, 2026
How do I find my camera username and password?
If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button. To reset the IP Camera via the hardware reset button, please press and hold the reset button for more than 10 seconds and then all the settings will go to the default settings.
What is the password of CCTV camera?
IP camera default password list
| Camera Manufacturer | Username | Password |
|---|---|---|
| Grandstream | admin | admin |
| GVI | Admin | 1234 |
| HIKVision | admin | 12345 |
| Honeywell | administrator | 1234 |
What is the default username and password for Axis cameras?
Historically in older AXIS OS versions the default username has been root and the default password has been pass for all Axis edge devices such as cameras, encoders, decoders and system devices.
What is the default password for Vivotek IP cameras?
The camera restarts and load the default settings. The default username and password for Vivotek cameras are admin/123456 for some models and the username is root with an empty password.
What’s the default password for an IP camera?
LTS default password for IP cameras, DVRs, or NVRs depends on the model numbers and make. Their earlier equipment is already activated and comes with a username and a password.
What to do when you change your camera password?
When changing the password this should be in alphanumeric characters (i.e. a,b,c… 1,2,3…) only with no special characters or spaces. If the default password has been changed you cannot recall what you set it to you will need to reset the camera to the factory defaults to regain access.
What is the default password for LTS camera?
If it’s a camera connected to the NVR, then the camera will automatically get the same password as the recorder. LTS Default Password Username: admin and password: 12345
How do I Change my ipcamera username or password?
An error occurred while retrieving sharing information. Please try again later. 1. Locate your device using the ConfigTool. 2. Input your device’s IP address into Internet Explorer. 3. Login to your device using the following credentials: 4. Click, “Setup” 5. Click, “System” 6. Click, “Account” 7.
What’s the default password for a CCTV camera?
Most Popular CCTV Brands Acti default username/password. Username: Admin/admin; Password: 12345/123456; IP address: 192. 168.0.100; Arecont Vision default username/password. Arecont does not have a default password , but you can reset it to factory settings. Follow these steps: Access the camera’s web interface by typing the IP in your web browser.
Is there a default password for Arecont security cameras?
Arecont does not have a default password , but you can reset it to factory settings. Follow these steps: 1-Access the camera’s web interface by typing the IP in your web browser. 2-Under the Administration or System tab, click on Restore to Factory Default.
What should I do if I forgot the password to log in the cameras?
What should I Do if I Forgot the Password to Log in the Cameras/NVRs 1 Restore the password on Reolink software if you still have any device can connect this camera/nvr The following… 2 Hard reset the password by pressing the reset button if no devices can still connect this camera/nvr More
How to find the DVR default password list?
Thus, below is the DVR default password list by brand name and manufacturer. Note that if you alter system default values, then credential of default is no longer apply unless you do a reset.
