How do I fix ARC not working?

How do I fix ARC not working?

Perform a power reset on the TV and audio system:

• Turn off the TV and the audio system.
• Disconnect the power cords (mains lead) and the HDMI cable from both the TV and audio system.
• Reconnect the HDMI cable to the HDMI IN (ARC or eARC) input of the TV and the HDMI OUT (ARC or eARC) of the audio system.

Can a Yamaha yas-108 be used as a TV?

The ARC feature is not working properly. I connect the HDMI cable to HDMI3 on the TV and to the HDMI out on the Yamaha YAS-108. Anynet+ is also enanled on the TV. The TV will turn on the YAS, and also turn it off. However, I cannot hear any sound at all. Any suggestions? Solved! Go to Solution. 04-30-2020 01:31 PM in

What’s the problem with my Yamaha sound bar?

Turning to the internet, there was absolutely no support or information on this problem for this Yamaha HTY-750 soundbar model. But I did find a repair manual online and opened the unit up to see if there was anything obvious like a blown internal fuse. Seriously, these things are built like tanks.

Where is the capacitor on a Yamaha sound bar?

The capacitor is in position “C515″ on the power board and is actually labelled pretty clearly, so if you can get to the board in the first place, you’re not going to find it hard to spot the offending component. Note — before I start, let me say that I am not an expert of any sort when it comes to electronics, I am nothing more than a tinkerer.

Why does my sound bar have no sound?

Just no sound. Make sure that the soundbar input is correctly selected. The housekeeper would have had to press one button on the soundbar remote to mess that up. Make sure that the ARC or optical out are turned on in the TV menu. The TV speakers may have to be turned off and the audio output type changed.

The ARC feature is not working properly. I connect the HDMI cable to HDMI3 on the TV and to the HDMI out on the Yamaha YAS-108. Anynet+ is also enanled on the TV. The TV will turn on the YAS, and also turn it off. However, I cannot hear any sound at all. Any suggestions? Solved! Go to Solution. 04-30-2020 01:31 PM in

Can a Yamaha sound bar be connected to a TV?

You can set up the ARC with the TV as follows: Connect the HDMI Out (ARC) of the Yamaha Sound bar to the ARC connection on the TV. *On the back/side of the TV one of the HDMI connection may be labeled ‘ARC’. NOTE: If your TV does not have an input that is labeled (ARC), it may not be capable of this application.

Just no sound. Make sure that the soundbar input is correctly selected. The housekeeper would have had to press one button on the soundbar remote to mess that up. Make sure that the ARC or optical out are turned on in the TV menu. The TV speakers may have to be turned off and the audio output type changed.

How do I set up arc on my Yamaha TV?

*If you could not set it up properly, please try to reset (initialize) the settings of the unit to the factory presets. Check the setup menu of the TV to verify that ARC (HDMI CEC Control) is enabled. Press the TV button on the Yamaha remote and check that sound is output from the Yamaha Sound bar.