How do I get my Blu-Ray player to play sound through my TV?

How do I get my Blu-Ray player to play sound through my TV?

To output sound from a TV, connect the TV to the HDMI OUT 1 jack of the Blu-ray Disc player and change the HDMI Audio Output setting to Auto or HDMI1.

Why is there no sound coming out of my DVD player?

Ensure the audio cables from the DVD player are connected properly to the television or stereo receiver. Attempt to play a different disc in the DVD player. Try playing a different audio source through the television or receiver. Connect the DVD player to a different audio input on the television or receiver.

Why won’t the volume work on my LG TV?

Check if the TV Sound Out is set to TV Speaker. Check if the correct input is selected on the TV. Check if the TV volume is set to the correct level and not muted. If the external source, such as a cable or satellite box has a volume control, check if the setting is muted or set at a low volume.

How do I mute the sound on my Mitsubishi TV?

Use the UP/DOWN arrow buttons to navigate to the SPEAKERS selection menu. Use the RIGHT/LEFT arrow buttons to select TV SPEAKERS as the audio source. Press the INFO button and an icon of a speaker will display in the upper left corner of the screen. If the speaker icon has a line though it, then MUTE is enabled.

What should I do if my Mitsubishi TV comes loose?

Check the physical connection on the TV and the source device to make sure that it hasn’t come loose and is making solid contact. Connect another device to the same input. Make sure the source device is set to ouput HDMI. (some devices will require a manual setting to output HDMI). Switch that device to a different input.

What to do if you lose sound on your TV?

larry, first try to reset your TV. Disconnect it from AC power, then press and hold the power button on the TV, and not the remote, for 10 seconds. After another minute, plug the set back in and press power once. Then try the other sound out from your TV to a set of speakers etc.

What does a red LED mean on a Mitsubishi TV?

A Solid Red LED typically means that the lamp failed to start. First unplug the AC Cord from the wall power outlet and wait for 60 seconds before reapplying power to the TV. If after serveal attempts, the TV has not powered on and the LED on the front of the TV is still Solid Red, you may want to reseat the lamp.

Use the UP/DOWN arrow buttons to navigate to the SPEAKERS selection menu. Use the RIGHT/LEFT arrow buttons to select TV SPEAKERS as the audio source. Press the INFO button and an icon of a speaker will display in the upper left corner of the screen. If the speaker icon has a line though it, then MUTE is enabled.

What to do if your Mitsubishi TV lamp has failed?

Reinstall the lamp cover door and plug in the AC cord into the wall power outlet. If your lamp has failed check for warranty eligibility or contact Mitsubishi Consumer Relations at 1-800-332-2119. The original purchase receipt that shows the location and date that your TV was purchased.

How long to leave Mitsubishi TV in off condition?

If your Mitsubishi TV has a solid Yellow LED leave the TV in the OFF condition for at least 15 minutes to allow it to cool down. Ensure there is plenty of room between the edge of the TV and the surrounding walls or cabinets of the entertainment center. A gap of at least 4 inches around the entire TV is recommended.

Why is there no sound on my Blu ray player?

Change this setting to see if the amplifier produces any sound. If the surround sound of the Blu-ray home theater system doesn’t work, verify if there’s no audio from the rear speakers or if you can listen to the Dolby Digital® technology 5.1 surround sound through your TV .