How do I get to the main menu on a Swann DVR?
William Smith
Published Feb 13, 2026
How do I get to the main menu on a Swann DVR?
Right-click the mouse to access the Menu Bar. Live View mode is the default display for your DVR. Each camera connected will be displayed (multiple view modes available). You can check the operation of your DVR by using the status icons on the Live View screen.
How do I access the OSD menu in Swann?
To display the camera OSD menu on the screen, click the Iris + button. To navigate through the menu, click the up or down arrow. To change settings for a menu item, click the left or right arrow.
How do I troubleshoot my Swann DVR?
Advanced Troubleshooting
- Disconnect cameras. You should remove all camera cables from the rear of the recorder.
- Disconnect power supply.
- Connect one camera only.
- Interpreting the results.
- Setup as Isolation Test.
- Cross check the camera and cable.
- Interpreting the Results.
- Setup as Isolation Test.
How do I change my Swann settings?
You can easily change the name of your camera via the Device Settings tab. Tap to go to the camera’s Device Settings screen and adjust various settings such as the camera name, live video quality, motion detection sensitivity, and more.
How do I turn on my Swann DVR?
As your DVR is designed to be always on, there is no power button. To turn off your DVR, use the Shutdown function then disconnect the power adapter.
How do you flip a Swann camera?
You can also change this on the web: Setup->Camera->Image->Image Rotation .
Why does my Swann DVR keep rebooting?
Went through system to re-name the cameras and set the areas for motion detection, that’s when the DVR crashed, it kept rebooting and showing the 6 cameras, but I could not get into the main menu either with the remote control or mouse/usb.
Why is my Swann security video not loading?
Important Notice: Swann Security video not loading on Telstra mobile data Update: The issue has been confirmed on other carriers. Please try the troubleshooting shown below if you have similar issues regardless of the carrier network in use.
Why is my Swann app not working on my Samsung?
We have confirmed that after updating Samsung phones to Android 11 on the Telstra network, the phones are unable to stream live view or change settings using the Swann Security app while connected to mobile data. The issue has been identified on the Telstra network where the recent Android update would cause the APN to select IPv6 only.
How many cameras does a Swann DVR have?
The unit has been installed for a few years now, it is a Swann SWDVR 91425H (H-264) 8 channels, with 4 x Swann SWPRO – 535 cameras. I bought 2 additional cameras Swann Pro-735, I installed one of them temporary about 6/7 weeks ago and everything worked fine.
How can I download the Swann Remote app?
Match the Swann model name to the right app then click-through to the download page on iTunes or Google Play For SWIFI-ALERTCAM, SWIFI-SPOTCAM, DVR-4480V, DVR-4580V, DVR-4780V, DVR4-4980V, DVR8-4980, DVR16-4980, DVR-5580 & NVR-8580 Series DVRs, NVRs & Cameras
We have confirmed that after updating Samsung phones to Android 11 on the Telstra network, the phones are unable to stream live view or change settings using the Swann Security app while connected to mobile data. The issue has been identified on the Telstra network where the recent Android update would cause the APN to select IPv6 only.
What kind of signal does a Swann DVR use?
These are the 3 technologies that Swann uses, and you should cross-check your camera and DVR documentation to see which signal types each component uses. You can also check our Camera Compatibility Chart available on the Swann website.
What kind of firmware is Swann push notification?
Push notification setup for recorders (4480V, 4580V, 4780V, 4ch 4980V, 8 & 16ch 4980, 5580, and 8580) with V8 firmware FAQs for dealing with common issues after migrating your Safe by Swann cameras to Swann Security
