How do I pair my Kenwood dpx501bt?

Press the [Ú] button. “BT MODE” appears and enter the Bluetooth mode. Use the [Control knob] to select “SETTINGS” > “PAIRING” > “PHONE SELECT” (to select the cell-phone) or “AUDIO SELECT” (to select the audio player). For how to use the [Control knob], refer to <3-3.

Where do you connect the orange illumination wire?

Locate the orange wire leading from the back of the stereo’s wire harness. On some models, this is also sometimes a reddish-brown color. Locate the orange wire leading from the back of the stereo’s wire harness.

How do I get my Kenwood radio to play aux?

Press and hold the Menu button until “MEnU” appears.
Push the control knob up or down (toward FM or AM) until you see “Aux”
Push the control knob left or right until it says “On AUX”
Push the Menu button again to select this setting.

What is the orange wire for?

Red or orange wires are often used to provide the secondary phase voltage in a 220-volt application. You’ll find black and red or orange wires connected to 220-volt appliances like electric water heaters, well pumps, and older electric ranges.

What is the orange and white wire for on a car stereo?

The normal use of orange and orange/white wires is orange is for variable voltage to control display illumination dimming (i.e. the head unit display dims along with the other dash lights) while orange/white is a simple on/off signal of whether the dash lights are on (the head unit has only bright and dim display …

Where is the serial number on a Kenwood dpx501bt?

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DPX791BH / DPX501BT Serial number

Can a dpx501bt cause harmful radio interference?

This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation.

How to turn off power on Kenwood remote control?

BASICS To On the faceplate On the remote control Turn on the power Press . • Press and hold to turn off the power. Press and hold SRC to turn off the power. ( Pressing SRC does not turn on the power. ) Adjust the volume Turn the volume knob. Press or . Press the volume knob during playback to attenuate the sound.

What’s the best way to clean a Kenwood disc?

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth. Handling discs: • Do not touch the recording surface of the disc. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • Do not use any accessories for the disc. • Clean from the center of the disc and move outward.

How do I pair my Kenwood dpx501bt?