How do I pair my Klipsch soundbar with subwoofer?

How do I pair my Klipsch soundbar with subwoofer?

If for some reason they become unpaired at any time, it’s a quick and easy re-pairing process: simply hold the “pair” button on the back of the sub for 3 seconds. The blue LED on the back of the sub will start to blink. While it’s blinking, press the ‘pair’ button on the back of the soundbar once.

How do I connect my Klipsch Reference soundbar to my TV?

once you have placed the Klipsch HD Theater SB 3 soundbar where you want it either below or above your TV, connect one end of an optical digital cable (supplied) to your TV’s optical digital audio output jack and connect the other end of the cable into the optical input jack on the rear of the soundbar.

Why is my Klipsch sound bar not working?

This specifically has to do with a protection circuit that may inadvertently activate and shut the AC power supply off, thus preventing it from sending power to the bar. There is nothing wrong with the bar or the AC power supply – the AC power supply just needs to be reset.

What to do if your Klipsch remote control stops working?

Extract ` system ` folder onto blank USB. Unplug power to Bar 40. Plug in USB. Plug in power. Cycle Source until Source LED is blank. Wait until all LED turns off and starts to blink. Unplug power to Bar and remove USB. Plug power back. Multiple problems arise: 1. Klipsch remote control stopped working.

Why is my bar 40 not playing sound?

Bluetooth used to play media from the phones I connected to but the speaker does not play sound anymore. The source blue LED will be solid (meaning connected) but no sound comes through even when the volume is maxed on both device and speaker. 3. Optical still does not work. Still not audio coming from TV after firmware update.

What should I do if my sound bar wont turn on?

Plug the DC end of the power supply into the DC Input on back of the soundbar. 2. Unplug the AC power cord from the AC Outlet ORunplug the AC power cord from the AC power supply. 3. Turn the Main Power ON/Off switch on the back of the soundbar to the “ON” position. 4. Wait for about 10-20 minutes.

This specifically has to do with a protection circuit that may inadvertently activate and shut the AC power supply off, thus preventing it from sending power to the bar. There is nothing wrong with the bar or the AC power supply – the AC power supply just needs to be reset.

Why does my sound bar not have power?

The AC power supply affected is a separate box with a detachable cord that plugs into a standard AC outlet and another cord, fixed to the AC power supply, which attaches to the rear of the actual soundbar. Depending upon the sequence in which the bar is plugged into power, both the bar and the AC power supply will appear to not have power.

What’s the best way to reset a soundbar?

Turn the Main Power ON/Off switch on the back of the soundbar to the “ON” position. 4. Wait for about 10-20 minutes. This allows enough time for the protection circuit in the AC power supply to reset. 5. After 10-20 minutes have elapsed, plug the AC power cord into the wall or plug the AC power cord back into the AC power supply.