How do I reset my Onkyo SR707?

Onkyo TX-SR707 AV Receiver

While the unit is on hold down VCR/DVR and then press Standby.
The unit will say clear and then shut down.

What to do if your surround sound is not working?

If not, the audio will be very difficult to hear using a Surround Sound setting. Set Surround Sound to OFF when playing a source that is not encoded with a Surround Sound signal. Check each speaker to make sure they are properly connected to the A/V receiver. Perform a Test Tone function to verify if the speakers are working correctly.

How to troubleshoot if there is no sound or intermittent?

Make sure the MUTE function has not been activated. Try turning up the volume level. Check that there are no headphones connected. Check if the issue also occurs to other device connected to the TV. You may try to changing the TV channel or play back a movie on a DVD player. Try different cables to verify this is not a bad set of cables.

How to troubleshoot sound from the rear speakers?

[Solution] Troubleshoot Surround Sound Speakers 1 Verify that the rear surround speakers are properly connected to the Audio/Video (A/V) receiver.IMPORTANT: If… 2 Perform a test tone operation to check if the speakers are functioning correctly 3 Increase the rear speaker volume or surround speaker settings to maximum. See More….

Why does my audio system stop working on my TV?

Third-party devices may cause the Control for HDMI or BRAVIA Sync function of the TV and the audio device to stop working. Update the TV and the audio system with the latest software version. Turn on the Control for HDMI or BRAVIA Sync on both devices. Set the Audio Return Channel (ARC) or TV Audio Input Mode of the audio system to On or Auto .

How to troubleshoot low sound or no audio from the rear?

How to troubleshoot low sound or no audio from the rear surround sound speakers. Verify that the rear surround speakers are properly connected to the Audio/Video (A/V) receiver. IMPORTANT: If… Perform a test tone operation to check if the speakers are functioning correctly Increase the rear

What should I do if my Yamaha sound system is broken?

Yamahas, for instance, show the word “Protection” on the LCD panel. Others might display an error code you have to look up in the manual. As long as no hardware was actually damaged when your buddy pumped up the jams, resetting the protection trip should put your receiver back in working order.

When does surround sound not come from rear speakers?

Verify the source that you are playing is encoded in surround sound. NOTE: Surround sound is not present at all times. During periods of mainly dialog, most of the sound may come from the center speaker only, with audio coming out of the rear speakers when there is background or ambient noise.

What should I do if my AV receiver turns itself off?

Replace it with a new fuse of the same amperage and voltage (available from electronics parts stores such as RadioShack for about 50 cents a pop) and you should be back in business. If, after your fix, the receiver powers on, but then turns itself off after a few minutes, it’s possible something is physically damaged inside.

How do I reset my Onkyo SR707?