How do I reset my Pioneer VSX 917v?

1 Switch the receiver into standby. 2 While holding down the TONE button, press and hold the STANDBY/ON button

Switch the receiver into standby.
While holding down the TONE button, press and hold the STANDBY/ON button. for about three seconds.
When you see RESET? appear in the.
Press SETUP to confirm.

Are Pioneer AV Receivers any good?

Although not as popular as some brands, Pioneer AV receivers are high-quality and well worth considering if you are in the market for a receiver. There are two broad categories of receiver – the high-end Elite Series and the budget VSX Series. Elite VSX Series: high-end AV receivers at a slightly lower price point.

How do I set up optical on my Pioneer receiver?

Press the Home Menu button the remote (the one with the House), then select System Setup, then Input Setup. On the Input setup screen, arrow left or right until you get to the input you used for the Video, and then arrow down to Digital In, and select the appropriate Optical input (probably OPT-1).

How do you rename inputs on a Pioneer receiver?

While pressing the RECEIVER button, press SETUP . The remote LCD display shows SETUP. to select RENAME then press ENTER . input source you want to rename.

Is Pioneer better than Yamaha?

So, in Pioneer vs Yamaha receiver comparison, Pioneer makes Yamaha a runner-up in terms of power. Pioneer is claimed to be not only a brand of quality but also a brand of innovation.

Is Denon better than Sony?

The Sony is demonstrably more detailed, offering a bigger scale of sound with more grunt, drive and low-end depth than the Denon can muster. Next to Sony’s more robust character, the new Denon can sound a little delicate.

Do Yamaha receivers Sound good?

I also listen to valve based 2 channel stereo and have another 2 channel system using Denon Monoblocks. The Yamaha acquits itself very nicely in this company. Its music performance is perfectly acceptable for casual listening and its surround sound performance is absolutely great.

Where are Yamaha receivers made?

Yamaha have their own factory in Malaysia and have done since around 1990 where this receiver harks from. Denon, Marantz etc are built in Vietnam in a new Anam factory that also produces for many other brands including some Yamaha.

What is the model number of the VSX 917v?

Product Name: AUDIO/VIDEO MULTI-CHANNEL RECEIVER Model Number: VSX-917V-K, VSX-917V-S Responsible Party Name: PIONEER ELECTRONICS SERVICE INC. Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90801-1760, USA Phone: 1-800-421-1404 VSX_917.book.fm Page 2 Thursday, December 7, 2006 4:40 PM

What kind of AV receiver does pioneer have?

Pioneer VSX-917V receiver has such number of functions that it will be difficult to find competitors by this factor.

Where is the enter button on a pioneer receiver?

On Pioneer receivers, you unplug the unit, fully powering it down. Plug it back in, but do not power it up yet. On the front panel, find the button marked “Enter”. Depending on unit, this may be a single isolated button or a bar type button along a line of such bars.

Where is the HDMI cable on a pioneer TV?

These are mostly at the back of the top HDMI board on most Pioneer units. If you remove the top cover (side and back screws hold it on, then lift the back up, and pull up and out toward the back), you will see the top board. You will see one HDMI cable going frontwards.

Pioneer VSX-917V receiver has such number of functions that it will be difficult to find competitors by this factor.

How do I reset my Pioneer VSX 917v?