How do I reset my Samsung Bluetooth subwoofer?
Daniel Foster
Published Apr 22, 2026
How do I reset my Samsung Bluetooth subwoofer?
Use a small pointed object to press the ID SET button on the back of the subwoofer. Continue holding until STANDBY turns off and LINK (Blue LED) blinks quickly. While the soundbar is turned off, press and hold Mute on the remote control.
Why is the blue light on my subwoofer not working?
As soon as the subwoofer is plugged in to the power outlet, the red light displays for a second, goes out and then the blue light blinks constantly. It will only stop blinking blue when unplugged from power. The manual says it should blink for 30 seconds and then go into Stand by mode (blue light off and red light on solid).
What to do if your subwoofer is not pairing up?
If you run into a pairing issues it is important to unplug everything from the main unit (all HMDI and other connections except for power) and reset the bar by pressing and holding three buttons (volume up and down and source) until the device shows that is has reset. Unplug the power cable and unplug the subwoofer.
Why does my subwoofer not sync with my sound bar?
Up untill recently the pair have worked together fine. Now though, the subwoofer won’t sync to the soundbar. When the subwoofer is powered on, the red stand by light comes on for a second and goes out. Then blue wireless connection light blinks constanty and never connects to the soundbar. This occurs even when the manual reset steps are completed:
What does the flashing LED on my subwoofer mean?
The table below shows what the colors of the flashing LED ( On/Standby indicator) of the subwoofer mean. Power is on. The SECURE LINK connection is active. Power is on. The SECURE LINK connection is active. Power is off. The subwoofer is in standby mode. Indicates rise in temperature of the subwoofer. Follow the steps below to resolve this:
If you run into a pairing issues it is important to unplug everything from the main unit (all HMDI and other connections except for power) and reset the bar by pressing and holding three buttons (volume up and down and source) until the device shows that is has reset. Unplug the power cable and unplug the subwoofer.
As soon as the subwoofer is plugged in to the power outlet, the red light displays for a second, goes out and then the blue light blinks constantly. It will only stop blinking blue when unplugged from power. The manual says it should blink for 30 seconds and then go into Stand by mode (blue light off and red light on solid).
Up untill recently the pair have worked together fine. Now though, the subwoofer won’t sync to the soundbar. When the subwoofer is powered on, the red stand by light comes on for a second and goes out. Then blue wireless connection light blinks constanty and never connects to the soundbar. This occurs even when the manual reset steps are completed:
The table below shows what the colors of the flashing LED ( On/Standby indicator) of the subwoofer mean. Power is on. The SECURE LINK connection is active. Power is on. The SECURE LINK connection is active. Power is off. The subwoofer is in standby mode. Indicates rise in temperature of the subwoofer. Follow the steps below to resolve this:
