How do I silence my DSC alarm?

Press * and then the 6 button on the keypad.
Enter your master Code.
Use the < and > keys to scroll to “Buzzer Control”
Press *
Use the < and > keys to scroll through the various buzzer settings, and adjust to your preference. “0” will silence the DSC keypad.
Press # to exit.

How do you reset a DSC alarm?

How to Reset a DSC Alarm After the Power Has Been Off

Open the access door on the unit.
Press and hold the “RESET” key for 2 seconds.
Press the buttons “*72” if the alarm does not reset after pressing the RESET button.
Check the sensors if it still does not turn off.

How do I turn off my guardian alarm?

Press the “Home” or “Away” button to arm the system, then immediately enter your access code and press “Off.” This action will reset the alarm to illuminate the low-battery signal to the system. The “Low Bat” indicator will go off, and the sensor number will be erased on the keypad of the master console.

Why does my alarm keep beeping?

Most often this is due to a loose sensor or a faulty battery. Household alarms have a display screen on the main control panel that indicates which sensor is causing the beeping. To fix a house alarm system that keeps beeping sometimes requires bypassing the zone that the sensor is in altogether for a short time.

How can I Stop my DSC alarm from beeping?

The first step is to stop the beeping so you can calmly trace and work on the trouble that caused the system to beep. Using any keypad, check if the alarm system is disarmed. If it is not, put in your disarm code. Press the pound (#) key. To know the trouble detected by your alarm system, press the star (*) key, followed by number 2.

When do I need a DSc alarm service?

DSC alarm system programming should be done by a qualified technician. In most cases the program code is not known and makes this process difficult to do yourself. A full factory default is then required. If your alarm system is beeping, this is a signal that your alarm system needs to be serviced.

What should I do if I hear a dial tone on my DSC?

If there is a dial tone, check first if there are visible disconnections between your panel and the phone box. After that, you may need to contact your security company to check further for damaged connections. You also need to contact them if you recently had a cable telephone or DSL installation so they can update your system.

Why does my alarm not detect a telephone line?

Your alarm system cannot detect the telephone line due to either damaged telephone lines or an interrupted phone service. First, plug a home phone into the telephone jack in your phone box and check for a dial tone. If there is a dial tone, check first if there are visible disconnections between your panel and the phone box.

How can I tell if my DSC alarm is disarmed?

Using any keypad, check if the alarm system is disarmed. If it is not, put in your disarm code. Press the pound (#) key. To know the trouble detected by your alarm system, press the star (*) key, followed by number 2.

How to turn off telephone line monitoring on DSC 1616, 1832 and 1864?

I’m not using a telephone line, how do I turn off telephone line monitoring on the DSC 1616, 1832, and 1864? Enter programming with *8 – installer code. Go to section 015. Turn off toggle option 7 by pressing 7. Press # twice to exit programming. Verify that the trouble condition for the phone line should is gone.

How do I silence my DSC alarm?