How do you arm and disarm Bosch alarm?
William Smith
Published Feb 23, 2026
How do you arm and disarm Bosch alarm?
Solution/Bosch Alarm Panel
- To Arm System. Enter USER CODE the # (Away) eg.
- To Disarm System. Enter USER CODE then # (Away) eg.
- Memory Recall. Enter MASTER CODE then 3 then # (Away) eg.
- Isolate Sectors (Permission Required)
- Fault Reports.
- Fault Analysis Chart.
- Other System Tests.
- Reset Time & Date.
How do you disarm a Bosch alarm?
To disarm your Bosch Keypad (or to turn your system off):
- Enter your 6-digit passcode and press ENT (you have 8 seconds to enter your code)
- The keypad will then display the disarmed message.
What are the features of the Bosch icp-cc488?
Introduction EN | 8 ICP-CC488 Features 1.0 Introduction The ICP-CC488 security system uses the latest in microprocessor technology to provide you with Congratulations on selecting the ICP-CC488 Control useful features, and superior reliability and Panel for your installation. Take the time to read performance.
How to install icp-cc488 control panel 1.0?
1.0 Introduction Congratulations on selecting the ICP-CC488 Control Panel for your installation. Take the time to read through this guide and familiarize yourself with the outstanding operating and installation features of this system so you can get the most from your unit.
What is the code for the Bosch panic alarm?
Bosch Security Systems, Inc. | 12/08 | F01U089457-02… 66). A codepad Panic Alarm transmits Contact ID Event Code 120 if the system reports to a base Single button disarming from STAY station receiver. Mode 2 reports as User Code16. Bosch Security Systems, Inc. | 12/08 | F01U089457-02…
How to turn off two beeps on icp-cc488?
Take the time to read performance. Enter command [9 6 0] and press [AWAY] to exit Quick Start from Installer’s Programming Mode. The following steps allow you to use the ICP-CC488 Two beeps sound and the STAY and AWAY Control Panel with factory default values. The default indicators are extinguished.
How to install the icp-cc488 control panel?
1.1 Introduction Thank you for choosing the ICP-CC488 Control Panel for your installation. You will find this system extremely flexible, reliable, and easy to use. This Quick Reference Guide is supplied with the system to provide users with enough basic information to wire, configure, and program the system.
Who is the owner of Bosch Security Systems?
Copyright Notice Unless otherwise indicated, this publication is the copyright of Bosch Security Systems, Inc. (“Bosch”). All rights are reserved. You may download a single copy of this publication.
Is there any way to reproduce Bosch books?
Except as specified above or where authorized by the Copyright Act 1968 (Cth), no part of this publication may be reproduced, transmitted, modified or stored, in any form or by any means, without the prior written permission of Bosch. Notice of Liability