How do you brighten the display on a Bose Wave radio?

How do you brighten the display on a Bose Wave radio?

To adjust the display brightness: Press and hold CD Mode button and, while holding it, use the Volume buttons to adjust the brightness. Note: Dim room adjustments are between 1 and 5; bright room adjustments are between 5 and 9.

Why is my Bose Wave Radio not playing?

With ALARM 2 flashing, press ALARM MODE or ALARM until the display shows no Alarm 2 mode indicators. You cannot set the clock to the correct time. Hold down the CLOCK SET button and press TUNING up or down. Release the TUNING button to stop. I can play one cd with sound. The radio has no sound. Also, I can’t get the attached 5 disc cd to play.

Is the Bose Wave Radio awr1-1w too dim?

If this doesn’t resolve the problem, here’s a link to the ifixit Bose Wave Radio AWR1-1W Screen Replacement guide, which may be of some help to check the connections to the display module and its’ associated components. Was this answer helpful? redmen-1 will be eternally grateful.

Where is the power cord on a Bose Wave Radio?

Double check that the power cord is connected to both the Bose Wave Radio and a wall outlet. If not plugged in at both ends, plug in the cord to the back of the speaker and the outlet. Make sure that the Bose Wave Radio is set to the input that you want to use. To use the AUX input, press the AUX button.

How do I Set my Bose Wave Radio to alarm mode?

Press ALARM MODE or ALARM until the display shows no Alarm 1 mode indicators. On the control panel, hold down ALARM SET and press ALARM MODE until the ALARM 2 indicator flashes. Release ALARM SET. On the remote, press TIME, then press ALARM .

Where is the battery in a Bose Wave Radio?

Locate the battery compartment on the bottom (Figure 2). 3. Press the arrow on the cover to slide the compartment open. 4. Place the battery inside, matching the large (–) and small (+) terminals with the opposite size terminals on the clip inside the compartment. 5. Press the terminals together firmly. 6.

With ALARM 2 flashing, press ALARM MODE or ALARM until the display shows no Alarm 2 mode indicators. You cannot set the clock to the correct time. Hold down the CLOCK SET button and press TUNING up or down. Release the TUNING button to stop. I can play one cd with sound. The radio has no sound. Also, I can’t get the attached 5 disc cd to play.

Press ALARM MODE or ALARM until the display shows no Alarm 1 mode indicators. On the control panel, hold down ALARM SET and press ALARM MODE until the ALARM 2 indicator flashes. Release ALARM SET. On the remote, press TIME, then press ALARM .

What to do if Bose Wave Radio awr1-1w is not working?

With ALARM 2 flashing, press ALARM MODE or ALARM until the display shows no Alarm 2 mode indicators. You cannot set the clock to the correct time. Hold down the CLOCK SET button and press TUNING up or down. Release the TUNING button to stop.