How do you bypass zone on Concord 4?

Close all doors and windows.
Arm your system in STAY or AWAY mode.
Press # + CODE.
The keypad will display “BYPASS SENSOR _ _”, enter the sensor you wish to bypass.
The keypad will display “BYPASSED ZONE _ _” or “SENSOR _ _ BYPASSED”.

How to disarm the Concord fire alarm system?

Commands at a Glance Disarm the system. Cancel an accidental alarm. 1+ CODE CODE or 1+ CODE Arm to Level 2—STAY.*2+ CODE Arm to Level 3—AWAY.*3+ CODE Send a police alarm. Press and hold both POLICE buttons for 2 seconds. Send an auxiliary alarm. Press and hold both AUXILIARY buttons for 2 seconds. Send a fire alarm.

What are the numbers on the Concord 4 series security system?

Concord 4 Series Security Systems Part Numbers: 600-1021-95R 600-1022-95R 600-1040 Notices FCC Part 15 Information to the User Changes or modifications not expressly approved by GE Security can void the user’s authority to operate the equipment.

Is the Concord security system a Class B device?

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation.

What is the Ren of a Concord security system?

For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.

How to diagnose security system trouble signals on a Concord?

Older security systems communicated through a series of flashing lights and “bleep and bloop” noises. Many of them required a technician to plug a programming machine into them to diagnose any security system trouble. However, modern security systems make deciphering and fixing these issues much easier.

What kind of security system is Concord 4?

Concord 4. Concord® 4 is a full-featured security system for residential and commercial intrusion as well as residential fire detection that complies with false alarm standards.

Why does my Concord 4 Alarm keep beeping?

Security system trouble messages usually announce themselves through your keypad beeping. This is your first “warning” to check on the status and address any potential issues. On the Concord 4 Alarm panel, your “asterisk key” acts as the status indicator key. A variety of issues may be at fault for disturbing your peace.

How do you bypass zone on Concord 4?