How do you silence a Concord 4?

How do you silence a Concord 4?

Press the * (STATUS) button or arm/disarm the system to silence the beeps. They will resume after four hours unless the problem has been corrected.

Can a GE Concord 4 be used as an alarm?

The Concord 4 can be used strictly as a wireless alarm system, making it a good choice for a rental, two-story, or flat-roof home where running wires is not an option. The Concord alarm can also be configured as a hardwired security system, eliminating the additional costs and battery changes of wireless transmitters.

What is the user manual for Concord 4?

The Concord 4 User Manual (P/N 466-2183) contains user worksheets that you should fill out during the installation and programming of the system. For multiple-partition systems, we suggest a user manual for each partition. Read these instructions and all related documentation entirely before installing or operating this product.

What kind of security system does GE Home Security use?

The system we are dealing with is a GE Concord 4 – GE Home Security was purchased by Interlogix – previously there was a Concord 3 and Concord Express, and while there isn’t much difference in these models I can’t guarantee these instructions will work for other models. You’ll also need a keypad that is capable of programming the Concord 4.

How to reset Concord 4 home security system?

Main code – used to arm/disarm the system is at 0x03E2-3 (in my shot below it was reset to 9999) Installer code – what we are after, is at 0x03E5-6 (in my case it was set to 0602 by the installer) With the installer code in hand, we can use our keypad to enter SYSTEM PROGRAMMING.

How to troubleshoot a GE Security Concord 4 and turn off?

Troubleshoot your GE Security Concord 4 and stop the beeping alarm system. Enter your four-digit user code to turn off the beeping alarm on the keypad. Press the asterisk key on the GE Security Concord 4 keypad twice to get to the system status report.

The Concord 4 User Manual (P/N 466-2183) contains user worksheets that you should fill out during the installation and programming of the system. For multiple-partition systems, we suggest a user manual for each partition. Read these instructions and all related documentation entirely before installing or operating this product.

What kind of panel is the GE Concord 4?

The GE Concord 4 is a panel that has become a favorite among do-it-yourselfers and pro’s alike, and for good reason. Made by General Electric Products / GE Interlogix, the Concord 4 is a hybrid panel, meaning it can use both hardwire contacts and wireless sensors.

How do I Turn Off the alarm on my Concord 4?

Enter your four-digit user code to turn off the beeping alarm on the keypad. Press the asterisk key on the GE Security Concord 4 keypad twice to get to the system status report. The beeping will be different for each arming setting level.