How many Watts Does a Kenwood TS50 transceiver have?

How many Watts Does a Kenwood TS50 transceiver have?

Features | Specifications | Options | Rear Panel Despite its compact size, the Kenwood TS-50S has full-sized features and power. Output is adjustable to 10, 50 or 100 watts on 160, 80, 40, 30, 20, 17, 15, 12 and 10 meters. General coverage receive is from 500 kHz to 30 MHz.

Is the Kenwood ts-50s a remote control microphone?

The TS-50S is similar to our other VHF mobile transceivers in more than just looks: this HF rig is compatible with remote-control microphones featuring 4 programmable function keys. Accurate tuning, even at band edges, is initiated simply by pressing the AT TUNE key on the TS-50S.

What is the dynamic range of the Kenwood ts-50s?

All modes — LSB, USB, CW, AM and FM — are built-in. AIP (Advanced Intercept Point) Further enhancing the first-class receiver performance of the TS-50S — with a significantly reduced noise floor level — is our AIP system. This exclusive circuit design is capable of raising dynamic range to 105 dB.

What are the features of a Kenwood transceiver?

General coverage receive is from 500 kHz to 30 MHz. Naturally it supports LSB, USB, CW AM and FM. Dual VFO’s, 100 memories, AIP, RIT, IF shift, AGC and TF-set round out the features.

How do you connect a Kenwood AT-50 to a TS-50?

Connection Details 1. Turn the TS-50S power switch off 2. Connect either end of the supplied Control cable or the optional PG4M cable (6 m) to the TS-50S ACC connector. Connect the other end of the cable to the matching AT-50 connector. 3.

How many amps does a Kenwood ts-440 need?

Following on the success of the TS-430S, the Kenwood TS-440S was designed for superior performance in the the SSB, CW, AM, FM and AFSK modes. Coverage is 160 through 10 meters including the WARC bands with 100 watts final amplifier stage (40W AM). Requires 13.8 VDC at 20.5 Amps.

How do I Turn Off the power switch on a Kenwood AT-50?

Turn the TS-50S power switch off 2. Connect either end of the supplied Control cable or the optional PG4M cable (6 m) to the TS-50S ACC connector. Connect the other end of the cable to the matching AT-50 connector. 3. Connect the coaxial cable ( PL-259(M) connector) to the TS-50S ANT connector and the AT-50 INPUT IOOW connector.

What are the features of the Kenwood AT-50?

CLEANING IN CASE OF DIFFICULTY 1. FEATURES The AT-50 antenna tuner was designed for use with either a mobile or fixed station transceiver. Principal features of the tuner include the following : Coverage of all Amateur bands from 1.8 through 29 MHz provides total operating f exibility.