How much is pine worth per ton?
William Smith
Published Jun 02, 2026
How much is pine worth per ton?
Pine Sawtimber Pine chip-n-saw prices jumped to $18.02/ton on a Southwide basis, an increase of +8.6 percent. The Mid-South experienced the largest increase of +11.1 percent to $18.20/ton. The East-South increased +5.0 percent to $19.94/ton, but the West-South region dropped -1.8 percent to $13.89/ton.
How many pine trees make a ton?
A tree with no taper wood need to be 74 feet tall to make a ton. Lots of pine trees are 74 feet tall, and there is a bunch of weight in branches and roots. Lets just make an easy round off guess that it takes two pine trees to make a ton of green wood.
How do you estimate the weight of a pine tree?
It depends on many factors. To help you understand better, an 80-foot hardwood tree with a 24-inch diameter can weigh as much as 20,000 pounds while a 50-foot pine tree with a 12-inch diameter will only weigh as much as 2,000. Average pine wood weighs 54 pounds per cubic foot. 20 feet = 54 * 20 = 1080 pounds.
How much is a ton of pine sawtimber worth?
South-wide Average Prices
| Southeastern Average Stumpage Prices – US$/ton | ||
|---|---|---|
| current | ten years ago | |
| Pine Sawtimber | $25.41 | $23.80 |
| Mixed Hardwood Sawtimber | $30.76 | $21.65 |
How much does a 50 foot pine tree weigh?
-If butt diameter is 30 inches and height 100 ft a green pine will probably not exceed 7000 lbs. To help you understand better, an 80-foot hardwood tree with a 24-inch diameter can weigh as much as 20,000 pounds while a 50-foot pine tree with a 12-inch diameter will only weigh as much as 2,000.
Are poplar logs worth anything?
One would naturally think that a 50-year-old straight, healthy poplar tree would be worth a fair amount of money. Most of us are well aware of the high cost of lumber these days at any lumber outlet. The value of this tree would be $195.00 for an average of $866.00 per thousand board feet.
What are pine trees worth per acre?
How Much Money is an Acre of Timber Worth?
| Pine Timber Values/Acre | ||
|---|---|---|
| Year | Plantation* | Natural |
| 2017 | $1,542 | $1,618 |
| 2018 | $1,694 | $1,738 |
| 2019 | $1,566 | $2,055 |
How much is a ton of wood worth?
The current US South hardwood pulpwood average delivered price is $39.36 per ton.
How are pine logs measured in Mississippi Mills?
However, high-grade pine lumber and specialty mills often still measure volume using the Doyle Log Rule and pay per MBF (1,000 board feet). This is important because state law requires mills in Mississippi to buy timber using a consistent measurement (Mississippi Statute 75-27-113). Mills that weigh timber logs must buy by weight.
How is the weight of pine timber determined?
Conversions can be particularly helpful when determining timber basis and deducting timber depletion from income. High-production pine sawmills have changed to weight scaling and buy timber by the ton (2,000 pounds). Mills producing fuel, chips, pulp, or paper are also measuring timber only by weight.
Why is it important to convert pine timber to tons?
Converting pine timber volume to tons (or tons to volume) can be useful for tax record keeping, growth monitoring, and marketing. Measurement standards for pine timber have changed over the last couple of decades. Inventories of standing timber in the past were kept in units of volume (cords and MBF).
How big does a pine tree have to be to qualify for pulpwood?
Pines with DBH (diameter at breast height) ranging from 6 up to 26 inches can qualify for pulpwood. Chip-n-saw is a medium-valued timber product that yields two-by-fours and chips. Straight, clear stems with DBH from 10 to 14 inches can qualify for chip-n-saw.
However, high-grade pine lumber and specialty mills often still measure volume using the Doyle Log Rule and pay per MBF (1,000 board feet). This is important because state law requires mills in Mississippi to buy timber using a consistent measurement (Mississippi Statute 75-27-113). Mills that weigh timber logs must buy by weight.
How to determine the value of a southern pine tree?
Evaluating Pine Weight and Value in a Stand: In the stand: Estimate or measure the dbhs (diameter @ 4.5 feet) and heights southern pines then tally each tree by dbh (to nearest inch) and height (to nearest 10 feet) class.
How much does a pine tree weigh per cord?
Loblolly and shortleaf pines average 2.6 tons per cord. Longleaf and slash pines have a higher specific gravity, making their timber heavier. Longleaf and slash pine average 2.78 tons per cord. Sawtimber. The Doyle Log Rule commonly is used to estimate volume of lumber in standing trees.
Pines with DBH (diameter at breast height) ranging from 6 up to 26 inches can qualify for pulpwood. Chip-n-saw is a medium-valued timber product that yields two-by-fours and chips. Straight, clear stems with DBH from 10 to 14 inches can qualify for chip-n-saw.
