How to arm the system in Simon XT?

Arm the system using either of the methods below. Arming Method – Stay Mode Press DOORS+WINDOWS button. Panel will then display and/or say “Doors and Windows On” and the DOORS+WINDOWS button lights up. The arming process begins with exit beeps sounding. Arming Method – Away Mode Press the MOTIONS button.

How to disarm GE Simon XT quick user guide?

GE Simon XT Quick User Guide GE Simon XT Quick User Guide Page 2 Arming & Disarming the System Arming (Turning on) Close all sensors (i.e. close doors and windows). The ready indicator should be on. Arm the system using either of the methods below. Arming Method – Stay Mode Press DOORS+WINDOWS button.

How does the Simon XTI security system work?

Introduction The Simon XTi uses wireless technology to warn your family about intrusion, carbon monoxide and fire. The system communicates with a central monitoring station and sends voice messages to an offsite phone. The security system uses sensors that communicate alarms to the control panel using radio waves.

How to trip a Simon XT door sensor?

Keep 10 feet of distance between the sensor to be tripped and the Simon XT panel. Door/window sensor Press the button on the top of the sensor (cover removed) or trip the tamper. Motion sensor Press the button on the back of the sensor (mounting plate removed) or trip the tamper. Hardwired sensor Separate the sensor from its magnet.

What should I do if my door is open when I arm my alarm?

If a door or window is open when you arm the system, it will be bypassed. The SYSTEM STATUS light will be lit. Press twice to eliminate the pre-programmed entry delay. The ARM doors & windows button blinks when No Entry Delay is on. Press once to turn the security system protection on for all intrusion motion sensors.

How does the Simon XT home security system work?

The Simon XT uses wireless technology to warn your family about intrusion, carbon monoxide and fire. The system communicates with a central monitoring station and sends voice messages to an offsite phone. The security system uses sensors that communicate alarms to the control panel using radio waves.

Which is the disarm button on Simon XT?

Disarming – Off Press DISARM , the display shows “ENTER CODE”, then enter your code. The panel will then display or say “Disarmed” and the DISARM button will light up. Silent Button– Press to silence exit beeps when arming. Bypassing Zones

How do I Turn on the alarm panel?

1. Open the control panel cover by pressing the plastic latch on top of the control panel. 2. Enter your [user code]. 3. The system voice will prompt you to begin with the START MENU. 4. Press the [Clock Set] button. 5. After pressing a button on the START MENU, the system voice will prompt you to then use the MAIN MENU. 6.

How to arm the system in Simon XT?