How to enable or disable door chime on DSC power series?

Here are step-by-step instructions on how enable or disable the door chime on a DSC Power Series security alarm monitoring panel: Click Here to Download a User Manual for Your System! Press and Hold the Chime button for two seconds . When complete the Keypad will Beep. Press * and then 4 .

How long does it take DSC power panel to charge?

The main panel battery is below 11.5 VDC. The trouble condition will not clear until the battery is at least 12.5VDC under load. If the battery is new, allow 1 hour for the battery to charge. Ensure the panel is getting proper AC power.

How to troubleshoot DSC power series troubleshooting guide?

Put a 1K resistor (brown, black, red) across Bell+ and Bell- to verify the trouble condition clears. If the output is not being used make sure a 1K resistor (brown, black, red) is connected between O1 and AUX+.

What should the voltage be on a DSc battery?

To verify the battery charging circuit disconnect the battery and measure the voltage across the two battery leads. The voltage should be 13.75VDC. With the battery connected remove AC from the panel and measure across the battery terminals. If the voltage is below 12.5VDC replace the battery.

How can I Stop my DSC home alarm from beeping?

You can easily toggle this on or off by pressing and holding the “Chime” button on any keypad that has function keys. For keypads without a chime button, just press “*4”. On this page, I’ll show you how to silence trouble beeping, and how to use a few easy keypad commands to find the source of the trouble.

How does the trouble code work on a DSc alarm?

Trouble codes are displayed on DSC keypads using either LED’s (on basic LED keypads) or as text (on LCD keypads with alphanumeric displays). Over the years, DSC has made many different alarm panels, and they don’t all share the same trouble code scheme.

How do I turn the chime off on my alarm system?

Press the “Chime” button. This button is below the volume bar and to the right of the “Voice” button. If the button has a green background, then chime is on. But if it is greyed out, then chime is off. Press “Save” in the lower-right corner of the screen to save the selection.

Is there a way to disarm a DSC system?

There are three possible ways to disarm a DSC System, and they are outlined below: 1. Disarm from the panel. To disarm from the panel, simply enter in a valid user code or the Master Code. The panel will be immediately disarmed if a valid code is entered. If an invalid code is entered, a two-second error tone will chime.

What does a chime mean on a security system?

A chime refers to an audible tone that a security panel and/or keypad produces when certain types of system zones are activated. This tone can be helpful for letting a user know that an activity has occurred on their security system, such as a door or window being opened.

How to enable or disable door chime on DSC power series?