How to restore factory defaults on Visonic PowerMax?

How to restore factory defaults on Visonic PowerMax?

The factory defaults can be restored by performing a RESET as follows. Remove all power (mains and battery) from the panel. Remove the panel from its backplate place face down on a cushioned surface. The Express needs removal of the internal cover. Identify the two left hand jumper pins marked DEF and fit a jumper across them.

How can I Reset my PowerMax to factory?

Unplug the power transformer for the unit from the household power supply. Unlatch the battery cover in the bottom left-hand corner of the system. Remove the single screw and plate that covers the rechargeable battery. Disconnect the battery by removing the small plug at the top right of the battery. Remove entire unit from the wall.

How to see the programming flow in Visonic?

The programming flow charts in the programming section show all options available for each parameter. Factory defaults are marked with a dark box to their right, and other options (that can be selected instead) are marked by clear boxes.

What are the paragraph numbers in PowerMax Visonic?

Most of the programming section paragraph numbers correlate with the programming menu numbers. For example, paragraph 4.4.18 describes the “Jam detect”, that exists in menu 4 (define panel), sub-menu 18 (Jam detect). Although setting the correct time and date is one of the user tasks]

How to reset user and installer codes on Visonic PowerMax?

Here we explain how to reset the user and installer access codes on Visonic Powermax and Powermaster control panels. You can reset the user and installation codes to their default settings by carrying out the following reset procedure. This will only reset the codes and no other settings. 1. Isolate mains power to the control panel.

Where do I find the installer code on Visonic?

1)To Access the installer mode via the user menu. Press until the display shows “User settings”, then press and enter the user code. Once in the user menu press twice until the display shows installer mode, then press followed by the installer code. L Default codes are :- User 1111 / Installer 9999.

What are the features of the Visonic Powerlink?

The Visonic PowerLink enables you to view and control the Visonic PowerMax+ / PowerMax PRO Security System over the Internet. It provides the following advanced features: • Event notifications to Email and mobile phones.

Unplug the power transformer for the unit from the household power supply. Unlatch the battery cover in the bottom left-hand corner of the system. Remove the single screw and plate that covers the rechargeable battery. Disconnect the battery by removing the small plug at the top right of the battery. Remove entire unit from the wall.