How to run system tests in IntelliSense Securit 800l?
Matthew Barrera
Published Feb 25, 2026
How to run system tests in IntelliSense Securit 800l?
To do this go to a keypad, enter a user code then press * then 9, each of the tests lasts for 5 seconds. All the lights on the control panel will illuminate, and the system tests start. Page 7 LOGS 12:0 LOGS The Control panel has the ability to look at the last 9 set and unset conditions of the panel as well as the last alarm conditions.
Which is the user manual for Securit 800l?
Page 1 USER MANUAL SECURIT 800L+ CONTROL PANEL… Securit 800L control panel (hereafter referred to as the “control panel”). IntelliSense would like to thank you for the purchase of this control panel. Ask your installer about the other great products we produce for the security industry.
How to do a sounder test in IntelliSense?
Page 6 9:0 SOUNDER TESTS SOUNDER TEST It is advisable to check that the sounders are working correctly periodically. To do this go to a keypad, enter a user code then press * then 9, each of the tests lasts for 5 seconds. All the lights on the control panel will illuminate, and the system tests start.
How does the exit tone work on IntelliSense?
The exit tone from any extension speakers will sound at a low level, the keypad buzzer will also sound. Any pulsed tones should return to a continuous tone once you have left the building and the sensors have cleared.
How to disarm the system in IntelliSense Securit 800l?
Page 4 3:0 DISARMING THE SYSTEM DISARMING Enter the protected area by the authorised entry route, a single continuous tone will be heard from any extension speaker and from keypads. Proceed directly to the keypad and enter your user code, the system will disarm.
How to reset an intelligent security fire alarm?
Go directly to the keypad and insert your user code, the system will disarm and the sounders stop, the zone/s will light on the control panel to indicate the cause of the alarm. Refer to page 7 to reset the alarm. TAMPER FAULTS The control panel has tamper circuits, giving protection from unauthorised tampering.
Page 1 USER MANUAL SECURIT 800L+ CONTROL PANEL… Securit 800L control panel (hereafter referred to as the “control panel”). IntelliSense would like to thank you for the purchase of this control panel. Ask your installer about the other great products we produce for the security industry.
Page 6 9:0 SOUNDER TESTS SOUNDER TEST It is advisable to check that the sounders are working correctly periodically. To do this go to a keypad, enter a user code then press * then 9, each of the tests lasts for 5 seconds. All the lights on the control panel will illuminate, and the system tests start.
