Is the vsx-d711 a good home theater receiver?

Is the vsx-d711 a good home theater receiver?

Pioneer VSX-D711. Pioneer’s inexpensive VSX-D711 might be the ideal receiver for those looking to move up from a compact shelf system to a decent home theater. In this case, inexpensive isn’t a code word for a stripped-down, el-cheapo model. The D711 has a full feature roster, ample power, classy style, and refined sound quality.

How can I isolate my VSX 915 AMP?

To isolate the speaker with the problem, connect the speakers one at a time and switch on the amp. You’re testing one speaker at a time here. If this doesn’t show any symptoms, then try connecting one at a time but don’t remove the previous speaker. So, you’re adding a speaker to your amp each time.

What’s the problem with my pioneer VSX 915?

Problem is that at times the volume seems a little too low for watching tv, films and playing music, but when i turn it up to a decent level it just cuts out within a couple of mins!! I have checked the manual and the website with no success and no details on this “overload” message.

Where is the serial number on the pioneer D711?

H006AEn The serial number for this equipment is located in the rear panel. Please write this serial number on your enclosed warranty card and keep it in a secure area. This is for your security. Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly.

Pioneer VSX-D711. Pioneer’s inexpensive VSX-D711 might be the ideal receiver for those looking to move up from a compact shelf system to a decent home theater. In this case, inexpensive isn’t a code word for a stripped-down, el-cheapo model. The D711 has a full feature roster, ample power, classy style, and refined sound quality,

To isolate the speaker with the problem, connect the speakers one at a time and switch on the amp. You’re testing one speaker at a time here. If this doesn’t show any symptoms, then try connecting one at a time but don’t remove the previous speaker. So, you’re adding a speaker to your amp each time.

Problem is that at times the volume seems a little too low for watching tv, films and playing music, but when i turn it up to a decent level it just cuts out within a couple of mins!! I have checked the manual and the website with no success and no details on this “overload” message.

What kind of sound does the pioneer D711 make?

The Pioneer’s sound is neutral and clean, but it’s nowhere near as warm and posh as that of the pricier Denons that we’ve heard recently. However, the D711’s audio quality is richer than that of Yamaha’s latest offerings.

The Pioneer’s sound is neutral and clean, but it’s nowhere near as warm and posh as that of the pricier Denons that we’ve heard recently. However, the D711’s audio quality is richer than that of Yamaha’s latest offerings.

Where is the optical cable on a pioneer TV?

The optical cable is clicks nicely into the ‘Optical Input 1 – (TV/Sat)’ port on the back of the receiver. Select ‘TV/Sat’ as the source on the receiver, but no sound. Same thing happened with the XBox.

Is there a problem with my pioneer receiver?

This has no effect (the manual says the function is only available if there is an analogue and digital signal to choose from). Its like it doesn’t see the optical source at all. Have digital coaxial from the DVD player – no problem. Phone input from ipod dock – no problem.