Is the Yamaha RX V471 receiver still working?

I have a Yamaha RX V471 receiver only connected to some polk speakers and ipod and we had a power blackout recently, previously it had been working perfectly. Whilst there was no power (still plugged in), I tried switching it on (with the remote) and it ‘weakly’ came on with the usual click which was weird, but it ‘died’ after that.

Why is my Yamaha RX v657 AV receiver not turning on?

The most likely cause of the problem is C405 going open circuit, next guess would be C406 going open circuit so the IC is trying to run on a pulsed supply. Brian. According to your first post, VHIS and CB407 are your AC mains input. VHIS and CB407 and are connected to VSHI and CB402 in the upper middle connector shown in your circuit.

What to do if your Yamaha receiver won’t power on?

I also unplugged all wiring from the back to assure it wasn’t a speaker wire issue. If the receiver is going into protection with nothing connected to the back you can be safe in tossing it. Cost of repair, if parts were available, would probably exceed the replacement price.

Is there a fix for my Yamaha rx-v459dab AMP?

Repair of this Yamaha RX-V459DAB.Also may fix other RX-V amps.2 years later, amp still working OK. Repair of this Yamaha RX-V459DAB.Also may fix other RX-V amps.2 years later, amp still working OK.

What to do if your Yamaha rx-v573 wont turn on?

I’d suggest you first disconnect all speaker wires and other connections, unplug the receiver and then leave it for 30 minutes. Plug the receiver in and powering it back up. If it still goes into protection mode then the issue is with an internal fault and you’ll need to have it looked at by a professional.

Can a Polk rtia9 connect to a Yamaha receiver?

Polk Audio RTIA9 WITH receiver Yamaha Rx-v579. Need power, is an amp possible? Solved! Htpc to Receiver Audio Sync Issue! AV Receiver not Powering Speakers. Question Yamaha YHT196 – HTR 2064 AV receiver not turning on? Solved! Problem on Remote control of Yamaha receiver RX V 475 Solved! How to connect Yamaha receiver to powered amp with rca inputs

How to connect a Yamaha receiver to a powered amp?

Problem on Remote control of Yamaha receiver RX V 475 Solved! How to connect Yamaha receiver to powered amp with rca inputs Solved! How to connect a Rockville EQ to a Yamaha RX-V567 Natural Sound AV Receiver/Amp with Polk Audio Surround speakers Solved! Hooking up an active subwoofer to A/V receiver Solved!

Is there a problem with my Yamaha remote?

Discussion in ‘Electronic Repair’ started by Matthew Kirkcaldie, Feb 24, 2007 . front or the remote. A quick look inside shows everything looking OK – fuses are also fine.

Is the Yamaha rx-v577 an AV receiver?

The Yamaha RX-V577 is meant to be a minor upgrade over the RX-V575 after all so it makes perfect sense to retain not just the overall look of the receiver but also most of the internals. Starting from the front, the Yamaha RX-V577 should look very familiar even to people jumping from an entry-level Yamaha receiver.

Why did my Yamaha rx-v471 receiver die?

Yamaha RX-V471 died on me and sorry to tell you, it wasn’t a power surge. And even if it would have been one, my whole system is plugged in a APC Back UPS 1300W and it is still going on strong. So my AV was working in the best conditions.

Can you use Spotify on a Yamaha rx-v577?

On its own the Yamaha RX-V577 can access Spotify and Pandora which should cover most audio streaming fans. Bluetooth, on the other hand, is still missing so you will still need the YBA-11 Bluetooth accessory if you wish to bring older devices into the fold.

What are the features of the HTC rx-v577?

The RX-V577 includes network capability, an AV control app, 4K Ultra HD pass-through, 3D compatibility, Virtual Cinema Front, and a host of streaming features like Spotify, Pandora, AirPlay, and HTC Connect, plus much more. Is it really possible that this much fun can be had at this price point?

What to do if your Yamaha RX v671 won’t turn on?

Get a matching replacement at Jaycar if the current one looks burnt out or the wire inside the glass tube is clearly broken. Gently push the new fuse into place (with the power cord still unplugged!) by pressing the ends into the clips – not the glass middle – and see if it the receiver turns on okay.

Why does my Yamaha receiver shut off at 1 / 4 volume?

Yamaha receivers have a built in computerized protection circuit, which will activate in certain over-current conditions. This means that the unit is drawing too much current through the amplifier or power supply, and the built in computer turns the receiver off. This is designed to protect your receiver and speaker systems.

What to do when your Yamaha radio shuts off?

Turn the receiver on, and turn the volume control up to about half way. If the receiver stays on, please go to Step 3. If the receiver shuts off right away, the unit will require service. Please consult with your dealer for further assistance.

What kind of outputs does a Yamaha rx-v467 have?

Outputs include component video, two composite video, stereo audio and pre-outs for surround back channels that let you upgrade to a 7.1-channel setup. The RX-V467 will also support Yamaha’s optional wireless Bluetooth receiver (YBA-10) and universal iPod docks (YDS-12 or YDS-11) – a port for these is also included on the back.

Why did my Yamaha receiver die after power outage?

Whilst there was no power (still plugged in), I tried switching it on (with the remote) and it ‘weakly’ came on with the usual click which was weird, but it ‘died’ after that. I tried turning it on after the power came back, and it now does not turn on full stop, no light, no click no nothing.

What does red mean on Yamaha rx-v573 receiver?

Good to know. In the picture the text in red says no current, and the text next to the right arrow is just indicating that the power comes in to the PCB there and the text next to the down arrow indicates that the power goes out there (to the display).

What does it mean when a Yamaha receiver won’t power on?

My Yamaha receiver RX – V730 won’t power on. I hear a double click when I hit the power button. Seems like it’s turning itself off immediately and in a safety mode of some sort. Any advice before I chalk it up as a loss?

What was the problem with my Yamaha rxv1700?

I have a Yamaha RXV1700 that had power problems. It wouldn’t power-up without unplugging at the rear… this happened about 3 times before it finally packed in. A search on AVForums revealed a similar problem with the YSP-1000 ( yamaha-ysp-1000-power-problem ). It sounded like the same issue – a faulty capacitor.

How do you turn off a Yamaha receiver?

Push the power button, MAIN appear and then turn off. The Service manual talk about updating Firmware but I never found any RXV471-xxxx.bin file anywhere on the internet. Hold TONE CONTROL + INFO + POWER Buttons. Scroll all Main and Sub-Menus. Everything is ok.

What are the specs of a Yamaha rx-v457?

5.1 channel audio line-in, SPDIF input, audio line-in, audio line-out, center speaker output, component video input, component video output, composite video/audio input, composite video/audio output, headphones, main speakers output, monitor output, rear center speaker output, rear speakers output, subwoofer output 16.4 in 17.1 in 6.3 in

Why does my Yamaha receiver keep blinking red?

Usually when the receiver is in need of a reset, you usually see at least a blinking red light. Here is a possible explanation. When you operated the receiver during a period of very low voltage you caused the receiver to draw more current that it could handle, causing overheating.

Is the Yamaha RX V471 receiver still working?