Is there a fault in my Panasonic dmr-ez48v DVD recorder?

Is there a fault in my Panasonic dmr-ez48v DVD recorder?

My Panasonic DMR-EZ48V dvd recorder has developed a fault. 1. After plugging in the mains power I get the message PLEASE and WAIT alternating on the front readout This eventually clears and it then displays 0.00 (flashing). 3. After a further 1 minute and 8 seconds the Code U6 1appears quickly followed by the figure 3, the letter D and in red VHS.

Where is the SD card slot on a Panasonic dmr-ez48vk?

Toward the bottom-right of the front of the player, you’ll find a fold-down door that reveals an SDHC card slot, a FireWire port, and a USB flash input. Also located here are buttons to manually switch controlling either VHS or DVD media.

Why does my Panasonic DVD recorder switch to HDMI?

Modified firmware for factory mode. Fixed the instance where the DVD Recorder causes a Panasonic Plasma or LCD TV to switch to the HDMI input when the recorder begins a scheduled recording. Improved recording operation when Line-In NR is set to ON.

How does Panasonic DMR ez28k improve DVD recording?

Improved recording operation when Line-In NR is set to ON. Improved recording to DVD-R DL (Dual Layer) media. Fixed the hang-up problem during scheduled recording under a weak signal condition.

Why is my Panasonic DMR ez485v recording no sound?

Switch on, sometimes no sound; have to switch off and then on again to get sound. 2. Only Memorex, Fuji, and Sony DVD + RW discs have been used on the units. 3. With timer delayed recording, after trying to record, panel message says : ‘There might be a problem with the disc. Self check will start.’

Why does my Panasonic dmr-ez47v DVD player not work?

Rebooted and at this point almost nothing would work including VCR, front panel buttons, remote etc. So I panicked and hit the reset button and no change. Then isolated the DVD from all else by disconnecting the ribbon and power cables to it then rebooted via AC cord.

Is the Panasonic ez 48V video recorder good?

Unfortunately you’ve got the worst of the Panasonic EZ recorders, which for the most part aren’t all that great. The EZ-48v is full of bugs, quirks and design flaws. You can exchange and return all you want and you’ll probably not get one that works for much longer a month. Sorry to be so blunt but the EZ-48v is that bad.

Modified firmware for factory mode. Fixed the instance where the DVD Recorder causes a Panasonic Plasma or LCD TV to switch to the HDMI input when the recorder begins a scheduled recording. Improved recording operation when Line-In NR is set to ON.