What are the instructions for the Bose Wave music system?
Andrew Ramirez
Published Mar 13, 2026
What are the instructions for the Bose Wave music system?
1. Read these instructions – for all components before using this product. 2. Keep these instructions – for future reference. 3. Heed all warnings – on the product and in the owner’s guide. 4. Follow all instructions. 5.
Where are the caution marks on a Bose Wave Radio?
These CAUTION marks are located on the bottom of your Wave radio: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
How long does battery last on Bose Wave Radio?
Installing the battery The Wave®radio’s 9 volt battery maintains the memory and backup alarm system for up to three days during a power failure, or while the radio is unplugged. Operating without this battery leaves the memory unprotected, but will not harm the radio.
Can you use headphones with the Bose Wave system?
Insert fully. • The Wave® SoundTouch® music system (the system and SoundTouch® pedestal combination, or the SoundTouch® pedestal itself) is not to be used with the under-cabinet/wall bracket available from Bose. • Do NOT use the headphones at a high volume for any extended period.
Where do I plug in Bose Wave Radio?
Plug the AC power cord (to Wave® system) into the AC POWER connector on the rear of the Wave® music system or Wave® Radio II. 2. Plug the Bose® link cable (to Wave® system) into the Bose® link connector on the rear of the Wave® music system or Wave® Radio II.
Where do you place the DAB on a Bose?
Selecting a location The ideal placement of the Wave® DAB module is to the right of the Wave® music system, Acoustic Wave® music system II, or Wave® Radio II (when viewed from the front). However, the module can also be placed to the left or rear of the Wave® music system, Acoustic Wave® music system II, or Wave® Radio II.
How do I update my Bose Wave SoundTouch?
Look for the Update.stu file in the footer or header of your browser’s window, or in your Downloads folder Connect a USB cable from your computer to the Micro-USB jack (Setup A) on the back of your Wave SoundTouch pedestal Using your web browser, go to
1. Read these instructions – for all components before using this product. 2. Keep these instructions – for future reference. 3. Heed all warnings – on the product and in the owner’s guide. 4. Follow all instructions. 5.
Is the Bose acoustic wave music system legal in Canada?
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations (Canada only). CAUTION: To prevent electric shock, match the wide blade of the line cord plug to the wide slot of the AC (mains) receptacle. Insert fully.
What is the model number of a Bose acoustic wave?
EN 60825-1:1994+A1+A2, IEC 60825-1:1993+A1+A2. WARNING: Keep the remote control battery away from children. It may cause a fire or chemical burn if mishandled. Do not recharge, disassemble, heat above 100 ºC (212 ºF), or incinerate. Dispose of used batteries promptly. Replace only with a battery of the correct type and model number.
How does an acoustic wave music system II work?
You easily can move the system from room to room, or even outside. Your Acoustic Wave® music system II has molded inset handles for easy carrying. Optional accessories let you enjoy the system in places outside of your home. • Carrying case allows you to listen to your system while protecting it during transport.
Where is the serial number on a Bose Wave Radio?
Check to be sure your Wave radio contains the parts identified in Figure 1. Note: Find the serial number on the bottom of your radio. Write it on your warranty card and in the space provided on page 3. Figure 1 What comes with your Wave radio W A V E R A D I O R E M O T E C O N T R O L 1 2 4 5 6 3 / F T I M E A LA R S L P S T A .
How do you charge a Bose Wave Radio?
Place the battery inside, matching the large (–) and small (+) terminals with the opposite size terminals on the clip inside the compartment. 5. Press the terminals together firmly. 6. Slide the cover back and turn the radio right side up. Figure 2 Installing the battery 7 Connecting the power cord 1.
Where is the serial number on a Bose earcup?
The 17-digit serial number will be located on the inside of the earcup. You may have to slightly lift the inner fabric to see the label. Check the headband for a 4-digit code. If you are unable to locate one, remove the cushion to reveal the 17-digit serial number on the earcup.
How long does a Bose Wave Radio last?
The 9-volt battery maintains clock and alarm settings and operates the Wave®Radio/CD’s backup alarm system for up to 24 hours, during a power loss or while the system is tempo- rarily unplugged. Operating without this battery leaves the memory unprotected, but will not harm the product.
Is there a serial number for a Bose?
Please enter a product name, a serial number or a four-digit code. The information provided was either not found or entered incorrectly. Please try again. The information provided was either not found, or entered incorrectly. Please try again. We’re sorry, but we can’t seem to identify your product.
How to reset a Bose Wave Radio Alarm Clock?
You may try to reset the unit by unplugging and removing any batteries for several minutes, then reconnect power to see if able to regain normal display. Below is the information on using the alarm clock: On the radio, press and hold the Alarm Set button. The “Alarm” indicator for alarm 1 will begin to flash on the display