What are the specs of a Yamaha htr-5760?
Emily Sparks
Published Mar 05, 2026
What are the specs of a Yamaha htr-5760?
HTR-5760 1 fluorescent 20 Hz 76 dB mono: 0.2%, stereo: 0.3% sleep 47 KOhm 200 mV 110 Watt, 95 Watt 8 Ohm 20 – 20000 Hz, at 1 kHz 0.06 %, 0.7 % center, front, rear, rear center 1, 2 digital AM/FM fluorescent display 40 Yes loop AM / wire FM FM stereo/mono switch Yes Yes Yes Yes none none universal remote control infrared
Where is the serial number on a Yamaha htr-5730?
The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003.
When to disconnect power plug from Yamaha cabinet?
Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons. 15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.
HTR-5760 1 fluorescent 20 Hz 76 dB mono: 0.2%, stereo: 0.3% sleep 47 KOhm 200 mV 110 Watt, 95 Watt 8 Ohm 20 – 20000 Hz, at 1 kHz 0.06 %, 0.7 % center, front, rear, rear center 1, 2 digital AM/FM fluorescent display 40 Yes loop AM / wire FM FM stereo/mono switch Yes Yes Yes Yes none none universal remote control infrared
Why does my Yamaha htr-5250 shut off automatically?
I have a Yamaha HTR-5250 with 5.1 and DTS, along with varied DSP’s. Last night it starting shutting off automatically while watching a DTS disk at moderate volume. Turning the unit back on revealed the message “Check SP wires” on the front panel, indicating to me that there is probably some safety circuit being tripped.
What to do if your Yamaha receiver turns off?
Continue by disconnecting the L/R speakers and playing something loud. If the unit stays stable, check the L/R speakers and wires. If the unit still turns off, it’s the Center speaker & wires. – Disconnect speaker wires at both ends.
How many ohms does a Yamaha 600 Series Speaker have?
My speakers are all B&W of various guides (all 600 series, 605, 604, 603, 602 and 601) and they are all, with the exception of 605, circa 6 ohm resistance – which can obviously be different to impedance… but I expect they will be circa 6 ohms impedance at most frequencies too.
