What are the specs of a Yamaha rx-v367?

What are the specs of a Yamaha rx-v367?

RX-V367 Discontinued RX-V367 Amplifier Section Channel 5.1 Amplifier Section Dynamic Power per Channel (8/6/4/2 ohms) -/105/130/150W Surround Sound Processing CINEMA DSP Yes

How much does a Yamaha rx-v367 AV receiver cost?

The entry-level Yamaha RX-V367 is priced below $250 and comes with support for 3D Blu-ray content (via upcoming firmware update) plus plenty of connectivity options. In order for it to be able to deliver 3D content it comes with the latest HDMI ver1.4 inputs.

What’s the max volume setting on a Yamaha?

With the Yamahas it’s stuck at max volume (0). With the Yamahas there is a subwoofer trim setting but this isn’t the same thing as adjusting the relative LFE level. It’s a very strange oversight by Yamaha. Their much older receivers had this setting (I remember my old DSP-A1 did)

How to set up audio on a Yamaha?

Use “Audio In” in the “Option” menu to change the combination of video/audio input jacks so that it matches the output jack(s) of your external device (p.24). Video and audio are not synchronized… Use “Lipsync” in the “Setup” menu to adjust the delay between video and audio output (p.61). I want to hear audio from the TV speakers…

What kind of inputs does Yamaha rx-v367 AV receiver have?

The four HDMI 1.4 inputs on the RX-V367 let you simultaneously connect high-definition sources such as a Blu-ray player, a gaming console, and a cable/satellite tuner. As the latest standard, HDMI 1.4 adds 3D support and an Audio Return Channel.

What is the rx-v367 HDMI out hookup diagram?

RX-V367/HTR-3063 HDMI Hookup Diagram IN HDMI OUT HDMI IN 1 HDMI IN 2 HDMI IN 3 HDMI OUT HDMI OUT HDMI OUT HDMI Title RX-V367 HDMI Hookup Created Date 4/13/2010 9:37:05 AM

Is the Yamaha rx-v361-5 without a remote?

Recently bought an RX-v361 from ebay. It came without a remote, but seller assured it is in working condition – and it is, but… I can’t seem to access the basic setup menu without the remote! I want to change from stereo LR to 5.1 surround.

Why is the HDMI light on my Yamaha AVR not working?

On my Yamaha AVR the light only comes on when the BD player (HDMI connected) is powered up, and goes off if the BD player is powered off. Since you get that I’d suspect that your HDMI board is still functional, or partly function.