What do you need to know about Honeywell fg-1625t glassbreak detector?

What do you need to know about Honeywell fg-1625t glassbreak detector?

The FG-1625/FG-1625T glassbreak detector senses the sound of breaking plate, tempered, laminated, wired, coated and sealed insulating glass. These products are both UL and ULC listed. 8. Wiring the Detector Refer to the wiring diagrams (page 1) to select the appropriate wiring configuration.

Where can I mount a Honeywell glassbreak detector?

Mount the Detector Anywhere Mounts on any wall, in the window frame, or on the ceiling, with no minimum range and a maximum range of 25’ (7.6m) to the glass. Covers All Glass Types The FG-1625R works on all glass types, including plate, tempered, laminated, wired, film-coated, sealed insulating glass.

Can a Honeywell fg1625 be mounted on a wall?

The Honeywell FG1625 can be mounted on the ceiling, wall opposite the glass, wall adjoining the glass, or even the same wall as the glass, as long as it is within 25’ of the protected surface. The FG1625 is equipped with a FlexCore signal processor, which allows for faster, and more accurate detection.

How big is the fg1625 glass break alarm?

The FG1625 glass break requires 12mA in standby and up to 22mA maximum when in alarm with the LED active. The FG1625 is intended to detect the shattering of a framed piece of glass in an impact event.

The FG-1625/FG-1625T glassbreak detector senses the sound of breaking plate, tempered, laminated, wired, coated and sealed insulating glass. These products are both UL and ULC listed. 8. Wiring the Detector Refer to the wiring diagrams (page 1) to select the appropriate wiring configuration.

How much does a Honeywell glass break detector cost?

No Contract Alarm Monitoring starting at $10 a month! The Honeywell FG1625 is a glass break detector that can be added to any hardwired security system. The FG1625 is part of Honeywell’s Inte… The Honeywell FG1625 is a glass break detector that can be added to any hardwired security system.

The FG1625 glass break requires 12mA in standby and up to 22mA maximum when in alarm with the LED active. The FG1625 is intended to detect the shattering of a framed piece of glass in an impact event.

The Honeywell FG1625 can be mounted on the ceiling, wall opposite the glass, wall adjoining the glass, or even the same wall as the glass, as long as it is within 25’ of the protected surface. The FG1625 is equipped with a FlexCore signal processor, which allows for faster, and more accurate detection.