What if I lost my Schlage default programming code?

What if I lost my Schlage default programming code?

If you lose or forget your Programming Code, you can restore the factory settings, which will restore the default Programming Code.

Where do I find the programming code for my Schlage lock?

For Schlage locks, the default programming code is located on a label on the programming guide which came with your lock. If the guide is not available, you can remove the lock from the door and find the default code printed on a label on the back of the lock.

Can a Fe 595 lock be manually programmed?

Unlike most of commercial locks, the FE 595 / FE 575 have unique default programming codes for each lock. The programming code and (2) user codes are lock specific, and once the user has acquired this information the lock can be programmed with a new code per the instructions, downloadable from the link below.

Where is the programming code on a Schlage Lock?

For Schlage locks, the default programming code is located on a label on the programming guide which came with your lock. If the guide is not available, you can remove the lock from the door and find the default code printed on a label on the back of the lock.

What to do if your Schlage be365 fe575 does not work?

unlock lock. 2 Red 4DUC entered is not a valid 4DUC. Red User codes have been disabled. Enable User Codes. (See page 8.) numbers are pressed. None None 1. Too many incorrect user codes have been entered. Wait 30 seconds and try again. 2. If keypad does not respond after 30 seconds, then replace battery. For FE575, see page 3. For FE595, see page 5.

Why does my Schlage Lock not unlock my door?

If the user code does not unlock your Schlage lock and the Schlage button lights green then red, with 1 high and 1 low beeps, it is because vacation mode is enabled. When enabled, no user codes will unlock the door, preventing any unauthorized attempts of entry when no one is home for a prolonged period of time.