What is alarm Night mode?

Night Mode You set the alarm to suit the needs of your own night time routine, allowing to get the balance of security when sleeping but avoiding false alarms should you go to the bathroom or have a pet moving around downstairs.

When to use the ” stay ” or ” away ” mode on an alarm?

Take note that the “stay” mode is used in the daytime, when the occupants are awake. It’s a different story when they’re asleep. At that point, they’re more vulnerable to attacks by intruders, so they need tighter home security at night. In that case, the alarm system should be armed in “night” mode.

When to use Home Away Mode on Honeywell Vista?

Away – This mode is perfect for when you need to leave your house unoccupied as you run errands, head off to work, go on vacation, etc. In this mode, the perimeter and all all available interior spots of your residence are armed.

What do you need to know about the Ademco Security Manual?

About This Manual This manual is a step-by-step guide that will acquaint you with the system’s features and benefits. It defines the components and their functions, describes their operation, and provides clear step-by-step instructions for normal and emergency procedures.

What is maximum mode on Honeywell Vista 20p?

In this mode, the perimeter and all all available interior spots of your residence are armed. Entry delay is also enabled. Maximum – This mode is similar to Away, except there is no entry delay. How do you arm/disarm these modes?

Can a vista panel arm in Stay Mode?

The Vista-15P, Vista-20P and Vista-21IP series panels offer many convenient features, one of which is the ability to arm in the Stay Mode. When you arm your system in Stay, meaning you’re going to be staying on the premises, the system automatically bypasses any zone programmed as an interior zone type.

Which is the user manual for vista-20 security system?

VISTA-20 security system User’s Manual VISTA-20 N7527VI 4195ADEMCO -2- TABLE OF CONTENTS

What is alarm Night mode?