What should I do if my pioneer VSX receiver turns off?

@rule run the error detection service mode first. Then start off by checking your power supply. Use the Pioneer flowsheet and a good multimeter to check those things. Let us know what you find. Was this answer helpful? It’s going into protection Mode. You need to either use a factory reset or take it in to have it serviced.

What to do if your pioneer amplifier keeps turning itself off?

If it appears to operate normally, reconnect one speaker at a time, testing low and high volume levels before adding more speakers. If the amplifier still keeps turning itself off with no speakers, take it to a repair shop. Pioneer will have information on their website as to the locations of their authorized service centers in your area.

Where can I find the pioneer a / V receiver?

If you have questions, or if you encounter any bugs, please visit this thread: GreasyKidsStuff MOMMM! ROAST BEEF WANTS TO KISS GIRLS ON THE TITTIES! Title summarizes it pretty well.

Why is my pioneer VSX not switching on?

With the power totally disconnected from the receiver, disconnect all the speaker cables from the receiver, reconnect the power to the receiver, switch on the power outlet (if this is the case where you are) and check if the receiver switches on OK. If it still doesn’t switch on, there is a fault in the receiver itself.

When does the pioneer a / V receiver shut off?

It doesn’t matter what function we’re using, whether it’s using our Shaw DVR or watching a blu-ray or plugging in our iPod, it will shut off. Either 10 seconds after we turn it back on or a few minutes.

Can a speaker be disconnected from a receiver?

With the power totally disconnected from the receiver, check that the speaker wiring to the receiver is OK and that there are no short circuits between the wiring connections at either end, speaker or receiver or even from the speaker cable wires at the receiver end to the case of the receiver.

What happens when I Turn Off my receiver?

The receiver shut off after a few seconds and the standby light is blinking. All my speakers have plugs on the ends so there are no wires showing . I checked and nothing is touching together.

Why does my Yamaha AV receiver keep turning off?

Picture fine but the receiver shuts down. Most receivers don’t have modular construction so there isn’t a separate board. If there is a Yamaha factory service facility they should be able to tell you if the unit is worth fixing. Maybe they can offer you a refurbished receiver at a good price.

What do I do when my Receiver won’t turn on?

I press the button, and it comes on with the display lighted, and then about two seconds later it simply clicks and shuts off. (Perhaps I should add that I haven’t tried using the remote because I don’t have one for this receiver.)

Why does my AV receiver keep turning off?

Sounds like an issue with the receiver. If it’s still under warranty tell them that it turns off when it receives a surround signal with the surround speakers disconnected. If your input is HDMI you can try a using a digital input instead for audio and see it the problem still occurs.

Why is my Toms Guide receiver not turning on?

If it does shut down disconnect the other speaker. If it now turns on and stays on then the problem is with that speaker wire or speaker. It it still shuts down then the problem is internal to the receiver. Time to get a new one. Repair would likely cost way more than the unit is worth. First, I apologize for not responding sooner.

Why does my pioneer receiver shut off when I Turn on the TV?

because the receiver doesnt turn on when the television turns on, it is like saying the receiver would shut itself off to protect itself from damage.. but since it is already turned off, it simply remains turned off. could be a real problem with the televisions codes voltage. it could still be a problem with the receiver’s threshold value.

If you have questions, or if you encounter any bugs, please visit this thread: GreasyKidsStuff MOMMM! ROAST BEEF WANTS TO KISS GIRLS ON THE TITTIES! Title summarizes it pretty well.

Why does my receiver turn on and then shut off after?

Because all of the components are surface mount, board level devices, it is not common for them to be visually verified as faulty (except in the case of bulged/leaking capacitors). The most common causes are in the Power or Output circuitry, and unfortunately it is not a cheap repair.

How long does it take for HP 8730w to shut down?

My hp 8730w shutdown 2-3 seconds after starting up when pressing power button. The fan comes on and the lights in the powerpanel lights up and then it shuts down. No beeps comming at all and I tried hard reset without any luck. Any ideas what to do or try next ?

How to register an AV receiver vsx-1123-k?

AV Receiver VSX-1123-K Operating Instructions Register your product on (US) (Canada) •Protect your new investment The details of your purchase will be on file for reference in the event of an insurance claim such as loss or theft. •Improve product development

Do you need to unplug the pioneer onswitch?

CAUTION The ˜˚STANDBY/ONswitch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power.

What is the operating environment for a vsx-1325-k?

Operating Environment Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light) D3-4-2-1-7c*_A1_En

What should I do if my pioneer VSX receiver turns off?