What to do if your Sony sound bar fails?

What to do if your Sony sound bar fails?

Grab a soldering iron and carefully remove the failed capacitor. If you don’t feel comfortable doing this task, you may want to hire it out to a geeky friend : ) Go to your local electronics repair shop and buy a new 470uf 16v 105c capacitor. Panasonic, Nichicon, Rubycon and Nippon Chemicon are good brands of capacitors to buy.

Can a capacitor be replaced on a Sony sound bar?

Others have reported success by replacing the capacitor even when it doesn’t show signs of bulging or stress. Remove the board from the unit and locate the C914 capacitor, replace it (or have someone replace it for you) and see if that fixes it.

How to troubleshoot if there is no sound or…?

Check that there are no headphones connected. Check if the issue also occurs to other device connected to the TV. You may try to changing the TV channel or play back a movie on a DVD player. Try different cables to verify this is not a bad set of cables.

Why is my Sony protector not working properly?

If a cord is frayed or in contact with another terminal, an error will occur. Fix the connection to prevent a short circuit. Make sure the speaker impedance is within the recommended range. If the impedance is not correct, the speakers will not work properly and may be damaged.

What is the firmware of my Sony TV?

Please ensure that your TV’s firmware is v6.0744 or higher . You can check the firmware version by using the following menu path: Please ensure that the Android TV Core Services application is “Version 1.8.5…”

What happens when I restart my Sony Bravia TV?

After completing this part of the process, the TV will restart twice – displaying the Sony and Android start-up animation screen/logos – before returning to the BRAVIA initial setup screen. If this does not occur after the fifth attempt, please call our support line for further support

Check that there are no headphones connected. Check if the issue also occurs to other device connected to the TV. You may try to changing the TV channel or play back a movie on a DVD player. Try different cables to verify this is not a bad set of cables.