When did the Yaesu ft-101zd come out?

When did the Yaesu ft-101zd come out?

The Yaesu FT-101ZD was brought on the market in 1979, as a low-cost alternative for the FT-901ZD, which is the real descendant of Yaesu’s famous FT-101 series of transceivers.

How much does a Yaesu ft-101zd-craig Williams weigh?

Weight is in excess of 15 kg, due the built-in power supply, giving it the feel of a battleship. The powersupply can be fed from 100/110/117 or 200/220/235 Volts 50/60hz, and with the optional switching unit, even from 13.8 Vdc, altough you need a heavy-duty car battery.

Are there any used Yaesu transceivers for sale?

For auction a Yaesu FT-101ZD HF Transceiver in very good used condition, 450.0 ,thanks for looking and take care. Yaesu ft-101zd radial and axial electrolytic. Brand new pair of lower mast clamps to suit yaesu rotators hese are the geuine yaesu lower clamps.

Is the Yaesu FRG-7 HF HF for sale?

Yaesu frg-7 hf communications receiver. for sale is my yaesu vx 2e transceiver. yaesu md-1 dynamic microphone . This yaesu ft 101zd . It is in very good condition and Boxed. Excellent value at 23.73 and located in Shipping to United Kingdom .

What kind of ring mixer does a Yaesu ft-101zd use?

The PB1960A uses a balanced mixer with 2 Fet’s, the later PB2154A board uses a diode ring mixer, for a better big signal behavior. The IF board is the heart of the transceiver, and is the same in every type of FT-101ZD. The signal is first passed trough a monolithic filter with a bandwidth of 10 kHz, to have a wide band point for noise blanking.

What kind of circuit board does the Yaesu 101zd use?

Used in production runs 01 to 15 in the 101ZD This counter is a complete enclosed unit, consisting of a display board, a counter board and a count/ decode board. The unit uses standard TTL circuits.

Weight is in excess of 15 kg, due the built-in power supply, giving it the feel of a battleship. The powersupply can be fed from 100/110/117 or 200/220/235 Volts 50/60hz, and with the optional switching unit, even from 13.8 Vdc, altough you need a heavy-duty car battery.

When was the first Yaesu FT-101 transmitter made?

Fox Tango International and PAØPGA The FT-101 history The original Yaesu FT-101 series transceivers, produced in 1970-1978 in ever increasing numbers were a very good alternative for the very expensive American made receivers and transmitters of the time.