Which is version of the PC1500 did you get?

Which is version of the PC1500 did you get?

Some early versions of the PC1500 did not have the audible exit delay feature. Which version did you get? (it’s on the main IC chip in the middle of the board) If you have one of the later models, in programming location 34 turn on option 1 & 4. You may need to set the exit delay shorter.

How to restore the master code on a DSc 1500 alarm?

How to Restore the Master Code on a DSC 1500 Alarm. 1 Step 1. Press 8-1500 or 8-1550 on the keypad to enter programming mode. If the system does not beep, the panel needs a hard reset to clear all of the 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5.

What does the pc1500rk keypad do for You?

The PC1500RK keypads have an audible indicator (buzzer), a group of zone and system status lights and command entry keys. The keypad is used to send commands to the system and to display the current system status. The security station(s) will be mounted in a convenient location inside the protected premises close to the entry/exit door(s).

How do I change the master code on my computer?

You might also want to change the master code if you suspect it is known by someone outside your family or business. Press the “*” (asterisk) key on the main control unit and tap the “<” or “>” button until “Access Codes” appears on the display. Press “5” or “*” to enter the code menu. Enter the current master code using the number buttons.

Some early versions of the PC1500 did not have the audible exit delay feature. Which version did you get? (it’s on the main IC chip in the middle of the board) If you have one of the later models, in programming location 34 turn on option 1 & 4. You may need to set the exit delay shorter.

What is the master code for DSC security system pc1555?

The master code for your DSC PC1555 alarm system is used to manage access codes, modify the system settings and grant access to your property. By default, the master code is set to “1234” when the system is first installed.

How to reset DSC installer code to 1500?

“DSC PC1500/1550 Installer lockout removal (note: this only works on PC1500/1550 and not all models of those): To reset the Installer’s code to 1500: 1. With power on, short default pins and type * 8 0000. 2. Remove short from default pins and press 91 to remove the lockout. 3. Press 20, then 1500, then press # #.”.

You might also want to change the master code if you suspect it is known by someone outside your family or business. Press the “*” (asterisk) key on the main control unit and tap the “<” or “>” button until “Access Codes” appears on the display. Press “5” or “*” to enter the code menu. Enter the current master code using the number buttons.