Why does my surround sound system keep cutting out?

Why does my surround sound system keep cutting out?

The sound cuts in and out intermittently from one or more speakers. Verify the speaker wires are properly connected to both the speakers and the A/V receiver. Turn off any nearby electronic devices that may be interfering with the speaker sound. Move the speaker wires away from any electrical cords.

Why does my TV volume go up and down by itself?

Why does my volume go up and down on its own? This can be caused by a conflict between the program or device that you are trying to watch and the TV’s advanced audio settings specifically SRS TruVolume. Turn off SRS TruVolume.

Why is the sound on my TV distorted?

Distorted sound issue can be occurred due to loose connection, cable or problem with source. 1 Check if Distorted sound issue is related to any audio/video files or any particular TV channel.

How to troubleshoot low sound level, unable to raise the volume?

How to troubleshoot low sound level, unable to raise the volume, or other no sound issues. IMPORTANT: If model-specific information is needed to complete these steps, refer to the instructions supplied with the product. Manuals are posted on your model support page. To troubleshoot the issue, check the following. For a low sound or no sound issue.

How does a Sony portable audio player limit the volume?

Some of the Sony® portable audio players are designed to limit the volume level with the Automatic Volume Limiter System (AVLS) . The AVLS function is preset to ON. Although it is recommended to leave the AVLS setting on to protect the hearing of the listener, maximum volume cannot be achieved until the AVLS feature is turned Off .

Why does my sound bar turn off when the TV is off?

It will turn off in about a minute because the tv is off and it’s not getting a signal. If i unplug the optical cable it won’t do it. Only when the cable is plugged in. Solved! Go to Solution.

What to do when your sound comes out of your TV?

Try tapping the unit and seeing if the problem exhibits itself (or gets better). If so, and you are up for doing it, open it and look for the above faults. Re-soldering bad joints can work…and you can always try reselling a failed unit on eBay for parts if that’s more appropriate.