Why is my Anker Soundcore not connecting?

Try clearing previous Bluetooth pairings from the Anker SoundCore’s memory to see if this resolves the issue. You can do this by pressing both the “Volume Down” and “Volume Up” buttons for roughly three seconds. Try pairing the Bluetooth speaker with your device again to see if this resolves the issue.

Why won’t my phone connect to my Soundcore speaker?

If your device is out of range of your speaker, they will not be able to maintain a Bluetooth connection. Remove any obstacles between the speaker and your device, and move your device as close as you can to your ANKER SoundCore and try to pair again.

How do you reset Anker Soundcore pair device?

To start ANKER SoundCore Bluetooth Speaker reset, you need to forget the Bluetooth pairing on every device which has been paired with ANKER speaker. Press and hold the Power Button for over 8 seconds. Then click and hold Bluetooth Key for 2 seconds. Blue light should start blinking.

How do you reset an Anker speaker?

Resetting to factory settings – Instructions

switch on the Anker Soundcore Bluetooth speaker via the power key.
press and hold the Bluetooth button for at least 20 seconds.
switches the anchor Soundcore off again.
switches the anchor Soundcore on again.

Why is my Anker Charger not working?

Ensure the outlet you’re connected to is working. If possible, try connecting another device to that outlet to see if it works. If your portable PowerCore charger is not charging quickly, try using another wall charger. A two-amp charger will fully recharge your device over 12 hours.

How do you make Anker Soundcore discoverable?

Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Select the “Anker SoundCore” device from the list. Has the pairing been successful, the speaker’s LED will stay solid blue.

How do I reset my Soundcore flare?

Hard Reset ANKER SoundCore Flare 2

When ANKER SoundCore Flare 2 is turned on press Bluetooth Key.
Keep holding it for over 3 seconds.
When you hear a beep sound you can release Bluetooth Button.
The Blue LED light should start blinking.
Fantastic! Now ANKER SoundCore Flare 2 settings are back to its defaults.

How do you reset Anker Soundcore flare?

You should be able to perform a soft reset by pressing and holding the power button for 4 seconds when in a powered off state.

Why is my Anker Soundcore in pairing mode?

Try turning off Bluetooth on all devices that you do not want to connect then attempt connecting to desired device. First turn off Bluetooth on the device you want to connect to. Then press the Bluetooth button on the speaker down for 2-3 seconds to enter pairing mode. A flashing blue light indicates the speaker is in pairing mode.

How do you connect Anker speaker to other devices?

Turn on the speaker using the power button on the top. Upon first start, the Anker speaker is automatically set to the pairing mode and the blue LED flashes rapidly. If you have used the speaker before, simply press the Bluetooth button. The speaker is now ready for pairing and can be connected with other Bluetooth enabled devices.

What to do if your Anker Soundcore is broken?

If the device’s Bluetooth connection chip is broken, it stops the device from pairing at all and prevents any Bluetooth interaction. To avoid using a Bluetooth connection, you can use an auxiliary cord to physically connect the speaker to your device.

What does the blue light mean on Anker Soundcore?

A flashing blue light indicates the speaker is in pairing mode. Once in pairing mode, try reconnecting to the speaker. A steady blue light indicates your device is paired to the speaker.

How do I Pair my Anker Soundcore speaker?

Do not separate the two devices for more than 3 feet while pairing. Turn on the speaker using the power button on the top. Upon first start, the Anker speaker is automatically set to the pairing mode and the blue LED flashes rapidly. If you have used the speaker before, simply press the Bluetooth button for approx 2 seconds.

Why is my Anker Soundcore out of range?

Take a look at this page to troubleshoot problems with your speaker. The speaker is out of range, or has faulty Bluetooth. If your device is out of range of your speaker, they will not be able to maintain a Bluetooth connection.

Why is my Anker Bluetooth speaker not working?

There are several factors that can cause the Anker Soundcore Bluetooth not working issue. This problem prevents you from connecting the speaker to your smartphone and can be due to drained speaker battery, device not paired, or device not within range.

A flashing blue light indicates the speaker is in pairing mode. Once in pairing mode, try reconnecting to the speaker. A steady blue light indicates your device is paired to the speaker.