Why is my Onkyo tx-sr605 stuck in standby?

Why is my Onkyo tx-sr605 stuck in standby?

Onkyo TX-SR605 ‘Stuck in Standby’ Diagnose and Fix. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

What happens when you turn on Onkyo protect mode?

When the device goes into protect mode, the unit will shut down, and the standby light will blink continually. This prevents the fuse from blowing. If your fuse were to blow and the device continued to run the amp could become damaged. Unplug the receiver’s power cord from the wall and leave unplugged for at least one hour.

How can I Fix my Onkyo protect speaker?

Reconnect the power cord after at least one hour has passed. Leave the speaker and audio cables disconnected. Turn the receiver on and turn the volume to the maximum setting. Leave the receiver on for 30 seconds. If the receiver shuts off and goes back into protect mode you will need to contact your Onkyo dealer.

Why does my Onkyo standby light keep blinking?

First disconnect all the speakers. See if the unit will fire up after disconnecting it from the power for 1 hour or more. If it does you have a short in your speaker wiring. Check your connections and reconnect if it fires up. Now refer to page 129 of your manual.

Onkyo TX-SR605 ‘Stuck in Standby’ Diagnose and Fix. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

What to do if your Onkyo speaker goes into Protect Mode?

If the receiver shuts off and goes back into protect mode you will need to contact your Onkyo dealer. Turn the volume back to the minimum setting and turn off the receiver. Unplug the power cord from the wall and then reconnect the speaker and audio cables. Plug the power cord back in and then power then turn on the receiver.

First disconnect all the speakers. See if the unit will fire up after disconnecting it from the power for 1 hour or more. If it does you have a short in your speaker wiring. Check your connections and reconnect if it fires up. Now refer to page 129 of your manual.

Why does my Onkyo receiver not power on?

None of the capacitors look like they’re leaking or have gone bad. Not sure what else I can easily check myself. Since this was such a cheap system ($239 5.1 HTIB on Amazon 2.5 years ago), not worth paying someone to repair most likely.

If the receiver shuts off and goes back into protect mode you will need to contact your Onkyo dealer. Turn the volume back to the minimum setting and turn off the receiver. Unplug the power cord from the wall and then reconnect the speaker and audio cables. Plug the power cord back in and then power then turn on the receiver.

What causes the Onkyo protection circuit to be activated?

The Onkyo protection circuit is activated when the sensor in the receiver detects excessive heat or voltage irregularities. Using speakers with the incorrect impedance and running the receiver at excessive volumes for a prolonged period will trigger the protection circuit.