Why is my speaker not making sound?

Why is my speaker not making sound?

Check the speaker connections. Examine the wires on the back of your speaker and make sure your speakers are plugged into the proper location. If any of these connections are loose, plug them back in to secure the connection. A loose connection could be the reason you have a speaker with no sound.

How do you reset a Kenwood speaker?

Find a pointed tool such as a small screwdriver, locate the small red triangle light-up button located on the top left of the stereo and press it down for 5 seconds. This will reset your Kenwood stereo.

Why does my Kenwood 5.1 speaker not work?

My kenwood receiver turns on but it does not produce any sound. Volume is turned up and not muted. All 5.1 speakers are Home theater questions? Ask a technician for answers ASAP

What to do if your Kenwood receiver does not turn on?

Reconnect the front left and right making sure there are no fray strands of wire touching adjacent wires. Then connect only the CD to the CD Inputs, make sure speakers are turned on,Make sure MD/Tape is not selected, and also that Mute is not turned on. Let me know what happens. No sound.

Why do I say Kenwood AMP is bad?

Now the reason I say Kenwood is bad: the power supplies in their amplifiers suck, making them one the most common brands of amps that I’ve seen blown. Usually within a year or so of use.

How to troubleshoot low sound or no audio from the rear?

How to troubleshoot low sound or no audio from the rear surround sound speakers. Verify that the rear surround speakers are properly connected to the Audio/Video (A/V) receiver. IMPORTANT: If… Perform a test tone operation to check if the speakers are functioning correctly Increase the rear …

My kenwood receiver turns on but it does not produce any sound. Volume is turned up and not muted. All 5.1 speakers are Home theater questions? Ask a technician for answers ASAP

Reconnect the front left and right making sure there are no fray strands of wire touching adjacent wires. Then connect only the CD to the CD Inputs, make sure speakers are turned on,Make sure MD/Tape is not selected, and also that Mute is not turned on. Let me know what happens. No sound.

Why does my car stereo have no sound?

This can be due to your car stereo overheating or shorting out. This means that your radio has burned up and will no longer function. Because it no longer is obtaining any power, it cannot produce signals to the speakers so you have sound. If you’re still wondering why and how to fix a car stereo that has no sound, we’re moving onto the final step!

Why are my Blue Ray speakers not producing sound?

The on button for the speakers is in the on position. It started happening about 3 weeks ago. I have my blue ray plugged in under the DVD/cd input, an iPod under the tape input and then There is the radio all of which do not produce sound. Yes it does click. Please try disconnecting the unit from power, then disconnect all speaker.