Why is my volume not working on my cable box?

Why is my volume not working on my cable box?

Make sure your TV and receiver aren’t muted. Adjust the volume on your remote. Make sure the output on your TV is set to stereo or surround sound. Unplug your receiver, wait at least 60 seconds, and plug it back in.

What is Digital Audio Out?

A digital audio out refers to an audio output on a TV, Blu-ray player, game console – or any other AV device that creates sound. This output will send stereo or 5.1 surround sound audio to an amplifier, home theater system or soundbar. There are two main types of digital audio out – optical and coaxial.

What would the optimal audio settings for my Onkyo TX?

Ofcourse set the speakers “small”, you crossover shouldn’t be lower than 100hz, maybe even higher. Put your subwoofer in the front of your room. To get better sound, start saving for better speakers… you crossover shouldn’t be lower than 100hz, maybe even higher.

How can I set the subwoofer level on my Onkyo?

The best way to set it initially is with a Radio Shack sound level meter. On the Speaker Setup/Level Calibration screen on your Onkyo, set the Subwoofer level to about -3.0dB and set the volume knob on your sub about 1/3 the way up. Then play the internal subwoofer test tone from your Onkyo.

Why is there no sound Zone 2 on Onkyo?

Firstly, your AV receiver has no HDMI second zone abilities and its second output is merely a mirror of the main output. This is included in order to make it easier to connect a PJ in a room or setup that also includes a TV. As to why you’re not getting audio in association with certain sources.

Why does my Onkyo TV say no signal?

The tv says no signal. HELP? hoping someone hear can help me. When you say new Onkyo TX-NR676, do you mean new-new, like the HDMI doesn’t work out of the box, or is this a case of the HDMI output worked for a while, and then died? Does the front panel light up?

Why does my Onkyo home theater not work?

Your home theater or stereo system will not function properly if the receiver that controls it is having problems. There are several problems you can experience with an Onkyo receiver. Incorrect settings on your Onkyo receiver can result in no sound. The digital input signal should be set to “Auto.” Select the correct digital input source.

What should the input signal be on Onkyo?

The digital input signal should be set to “Auto.” Select the correct digital input source. Unplug headphones from the receiver when you are trying to use your system with the external speakers. Press the “Muting” button on the remote control to unmute your Onkyo receiver.

What are the symptoms of a bad Onkyo receiver?

This one is very common and it causes a lot of problems. Symptoms include not being able to receive any signal format other than 2 channel PCM, getting video but no audio from HDMI sources, and your receiver always being muted when you first turn it on. Always set HDMI Audio Out=OFF unless you want to use your television’s speakers.

The best way to set it initially is with a Radio Shack sound level meter. On the Speaker Setup/Level Calibration screen on your Onkyo, set the Subwoofer level to about -3.0dB and set the volume knob on your sub about 1/3 the way up. Then play the internal subwoofer test tone from your Onkyo.