Why is there no Sound when I play my DVD?

Why is there no Sound when I play my DVD?

Ensure the audio cables from the DVD player are connected properly to the television or stereo receiver. Attempt to play a different disc in the DVD player. Try playing a different audio source through the television or receiver. Connect the DVD player to a different audio input on the television or receiver.

How do I get the Sound to play on my TV from a DVD?

Connect your Blu-ray player to your TV using an HDMI cable. This will transmit both the video and the audio to your TV with one cable. Connect the AUDIO OUT ports on your DVD player to the AUDIO IN ports on your TV with standard audio cables (red and white jacks).

Why is there suddenly no Sound on my TV?

If the TV has a Headphone/Audio-Out settings in the Sound menu, set it to Audio-Out. Make sure all A/V cable connections are properly connected to the TV. Test the TV using another source like a VCR, DVD player or Blu-ray Disc player. Perform a power reset on the TV.

How if there’s no Sound from TV speakers?

Check the Speakers setting on the TV. NOTE: If the set-top box is connected using an Audio/Video (A/V) connection, make sure the A/V cables are connected securely to the appropriate video input on the TV. Make sure the TV audio has not been muted. Make sure no headphones are connected to the TV.

Why do I get no sound from my DVD player?

Switch off TV and DVD player then connect DVD ONLY to HDMI port. Turn on TV and DVD. Should then play with sound. Then reconnect any other HDMI cables. Not open for further replies. Question We have an old 5.1 Surround Sound DVD Player with speaker wire connections which has died.

What kind of video file has no sound?

Hi there , I have a video file in my flashdrive and when i connect it in our TV, the video plays well but there is no sound . What file type would i will convert it so that it would have sound. The current file type is VLC , thanks in advance.

What to do when there is no sound on your TV?

IMPORTANT: Verify that the source you are playing is encoded with Surround Sound audio. If not, the audio will be very difficult to hear using a Surround Sound setting. Set Surround Sound to OFF when playing a source that is not encoded with a Surround Sound signal. Check each speaker to make sure they are properly connected to the A/V receiver.

How to troubleshoot if there is no sound or…?

Check that there are no headphones connected. Check if the issue also occurs to other device connected to the TV. You may try to changing the TV channel or play back a movie on a DVD player. Try different cables to verify this is not a bad set of cables.

Why is there no sound coming from my DVD player?

★ Check if your DVD player switch settings is correct. ★ Another possible cause to no sound coming from DVD player is the selected audio track that the device might be powerless to handle. If so, try another audio track to have a test. ★ Check the DVD player software volume settings, muted or not.

Check that there are no headphones connected. Check if the issue also occurs to other device connected to the TV. You may try to changing the TV channel or play back a movie on a DVD player. Try different cables to verify this is not a bad set of cables.

IMPORTANT: Verify that the source you are playing is encoded with Surround Sound audio. If not, the audio will be very difficult to hear using a Surround Sound setting. Set Surround Sound to OFF when playing a source that is not encoded with a Surround Sound signal. Check each speaker to make sure they are properly connected to the A/V receiver.

Is it possible to have sound but no picture?

Connecting Bose Lifestyle 28 composite (no HDMI) to LG 4K OLED (only HDMI) for best picture & sound. When I connect my Humax to my Yamaha surround sound via a HDMI cable I have sound but the picture drops out after 5seconds. I have a DVD disc that gets picture but no sound.